Intermediate Glu Reading; Bill Totalizing/Bill Transfer - Sharp UP-820N Instruction Manual

■ Intermediate GLU reading

This function is used for temporary inspection of the guest check. The details of the guest check can be
printed on the receipt or the slip. For selecting these printers, contact your authorized SHARP dealer.
Procedure
b
*You can display open GLU codes by pressing the
• This function is available after finishing the guest check entry.
NOTE
• If the intermediate GLU finalization check is set to compulsory (INTERMEDIATE FINAL is set to
DISABLE in FUNC. PROHIBIT), a guest check cannot make settlement without printing the GLU
using the intermediate GLU reading function (temporarily finalization by the
Example

■ Bill totalizing/bill transfer

Bill totalizing
The bill totalizing function is used to totalize multiple bills when, for example, a particular guest pays not only
his or her bill, but also the bills of other guests.
Procedure
O
• #1 bill and #2 bills are merged into one bill. The GLU code on the merged bill is determined by
NOTE
the last entered #2 bill. A maximum of 5 bills is available for #2.
• The GLU code of #1 must be in use. If the guest check(s) of #1 or #2 has already been
handled by another clerk, the guest check(s) must have been made "Transferring out."
Example
Bill transfer
This function is used to change the GLU code of a particular bill.
O
Procedure
70
e
*
GLU code
Key operation
Enter a GLU code.
Select "RCPT".
[Select the GLU code]
# 1
GLU code
g
(1 to 9999.9)
Key operation
1002
1003
[Select the GLU code]
# 1
GLU code
g
(1 to 9999.9)
RECEIPT
OUTPUT
SLIP
s
key.
b
e
e
Adding the total amount of the
previous bill to that of the new bill
#2
GLU code
B
(1 to 9999.9)
g
B
g
ı
# 2
New GLU code
B
(1 to 9999.9)
e
e
f ı
or key is available.)
Print
ı
(Without receipt printing)
g
[Payment operation]
Display
ı
g
(Without receipt printing)