Plu Level Shift (For Direct Plus) - Sharp UP-820N Instruction Manual

■ PLU level shift (for direct PLUs)

This shift can add to the number of direct PLUs on your POS terminal without adding additional direct PLU
keys. You can use direct PLUs in ten levels by utilizing the PLU level shift number key
A
⁄
shift keys thru
Level key shifts the PLU level from the other nine to the required level. (The normal level is the level 1.)
You must program your machine in the PGM mode to select one of the two PLU level shift modes —
automatic return mode* and lock shift mode** — and decide whether to allow PLU level shift in both the
REG and MGR modes or in the MGR mode alone.
* The automatic return mode automatically shifts the PLU level back to level 1 after pressing a direct PLU
key or finalizing each transaction.
** The lock shift mode holds the current PLU level until depression of a PLU level shift key.
Automatic return mode (for PLU levels)
If your terminal has been programmed for PLU level in the automatic return mode, press a desired PLU
level shift key before a numeric entry.
Procedure
(Returning every item entry)
n
⁄
through
(Returning every transaction)
n
⁄
through
When you use the FF method, you need not press the
NOTE
52
.
n:PLU shift no.
ä
Numeric entry
A
x
(Q'ty,
ä
Numeric entry
A
x
(Q'ty,
Direct PLU
)
Direct PLU
)
x
key for multiplication entries.
ä
or the PLU level
Return to level 1
(Finalization)