Sharp XE-A203 Instruction Manual page 21

8. VAT/tax4 status programming (Press
(1) Go to (2) when the VAT/tax 4 status does not need
to be changed from "TAX4 NO". Otherwise, press
:
key to display "TAX4 YES".
:
Each time key is pressed, the display shows
"TAX4 YES" and "TAX4 NO" alternatively.
Default setting is "NO".
s
(2) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
9. Registration type programming (Press
(1) Go to (2) when the registration type does not need
to be changed from "NORMAL". Otherwise, press
:
key to display "SICS".
:
Each time key is pressed, the display shows
"SICS" and "NORMAL" alternatively.
Choose "SICS" for single item cash sale and
"NORMAL" for normal sale.
Default setting is "NORMAL".
If an entry of a department programmed for SICS is
made first, the sale will be finalized as a cash sale
as soon as the department key is pressed. If the
entry is made after entering a department not
programmed for SICS, the sale will not be finalized
A
until the key is pressed.
s
(2) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
10. Sign programming (Press
(1) Go to (2) when the sign does not need to be
changed from "(+)". Otherwise, press
display "(-)".
:
Each time key is pressed, the display shows
"(-)" and "(+)" alternatively.
Choose "(+)" for positive department and "(-)" for
negative department.
Default setting is "(+)" for dept. code 1 to 20 and 22
to 99, and "(-)" for dept. code 21.
s
(2) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
s
key to register the setting.
key to register the setting.
s
to skip. / Press
:
key to register the setting.
1
QUICK START GUIDE
Part
A
to skip. / Press
s
to skip. / Press
A
to terminate.)
key to
Part
to terminate.)
s
REGIST.TYPE
A
to terminate.)
s
SIGN
s
LIMIT DIGITS
2 3
Part
NORMAL
(+)
8
19