Programming An Administrator; Password - Sharp MX-M200D Operation Manual

PROGRAMMING AN ADMINISTRATOR

PASSWORD

1
Press the [SPECIAL FUNCTION] key.
ON LINE
DATA
SPECIAL
FUNCTION
LINE
COPY EXPOSURE PAPER SE
DATA
SCAN COLOUR MODE RESOLUT
The special function
screen will appear.
2
Select "SYSTEM SETTINGS" with the
[ ] or [ ] key.
PQ
ED COPY
LEX SCAN
LEX SCAN
ACC
3
Press the [OK] key.
GHI
BACK
OK
PQRS
PY
AN
The administrator
password entry screen
appears.
4
Use the numeric keys to enter the
five-digit administrator password.
ABC DEF INTERRU
GHI JKL MNO
PQRS TUV WXYZ
@.- _
ACC. #-C READ-END
• If this is the first time you are programming the
administrator password, enter the factory default
code. (Page 101)
• " " appears for each digit that you enter.
• The special modes screen will appear with
"CHANGE ADMIN PW" selected.
76
SPECIAL FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
DISPLAY CONTRAST
SPECIAL FUNCTION
PAPER SIZE SET
DISPLAY CONTRAST
TOTAL COUNT
SYSTEM SETTINGS
Enter admin
password.
ADMIN PASSWORD:
-----
MODE SELECT
CHANGE ADMIN PW
COPIER
PRINTER
SCANNER
5
Press the [OK] key.
OK
The administrator
password change screen
appears.
6
Enter the new 5-digit administrator
password with the numeric keys.
WXYZ
Any 5 digits can be used for the administrator
password.
7
Press the [OK] key.
• The previously programmed
OK
• Press the [CA] key to return to
CHANGE ADMIN PW
PRESENT:22222
NEW :-----
CHANGE ADMIN PW
PRESENT:22222
NEW :111--
administrator password is
replaced by the new
administrator password.
the base screen.