Cleaning The Machine; Cleaning The Document Glass And; Spf/Document Cover; Cleaning The Bypass Tray Paper Feed Roller - Sharp MX-M200D Operation Manual

CLEANING THE MACHINE

CLEANING THE DOCUMENT GLASS AND

SPF/DOCUMENT COVER

If the document glass, SPF, underside of the document cover, or the scanner for originals coming from SPF (A) (the
long narrow glass surface on the right side of the document glass) become dirty, the dirt may appear on copies.
Always keep these parts clean.
Wipe with a clean, soft cloth. If necessary, moisten the cloth with water or a small amount of neutral detergent. When
finished, wipe dry with a clean cloth.
Do not use thinner, benzene, or similar volatile cleaning agents.
Do not spray flammable cleaner gas. Gas from the spray may come in contact with the internal
Warning
electrical components or hot parts of the fusing unit, creating a risk of fire or electrical shock.
Cleaning the original scanning glass (only when a SPF is installed)
If white or black lines appear in copies made with using the SPF, use the provided
glass cleaner to clean the original scanning glass. (If white or black lines appear in
copies, printed pages, or printed fax pages when the SPF is not used, see
"CLEANING THE TRANSFER CHARGER" on page 38.
1
Open the SPF and take out the glass
cleaner.

CLEANING THE BYPASS TRAY PAPER FEED ROLLER

If misfeeds occur frequently when feeding postcards, envelopes, or heavy paper through the
bypass tray, wipe the surface of the paper feed roller with a soft, clean cloth dampened with
alcohol or water.
2
Clean the original scanning glass with
the glass cleaner.
3
Return the glass cleaner to its original
position.
(A)
Example of dirty print
Black lines White lines
Paper feed roller
37
2