Changing The Exposure And Original Image Type; Changing The Exposure And Original Image; Type - Sharp MX-M503N Quick Start Manual

CHANGING THE EXPOSURE AND
ORIGINAL IMAGE TYPE
Exposure and original image type settings can be selected as appropriate for the original.
The procedure for darkening the exposure and setting the original image type to "Text/Prtd. Photo" is explained
below.
The side to be scanned must be face up!
Scan Internet Fax Fax USB Mem. Scan
Address Book
Original Scan: Auto
Address Entry
Exposure Auto
(1)
Send Settings Resolution 200X200dpi
File Format
Address Review PDF
File Colour Mode Mono2
Special Modes
Quick File
Preview
When Fax/I-Fax address is included,
exposure setting shared among Fax/
I-Fax/ Scanner mode is selected.
Scan/Exposure
Auto
Original Image Type
Manual
Text/
Text
Prtd.Photo
(3)
Printed
Photo
Photo
1 3 5
(4)
Moiré Reduction
1
Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
2
PC Scan Select settings in the touch panel.
A4 Send: Auto
(1) Touch the [Exposure] key.
(2) Read the displayed message and touch the
OK
(2)
(3) Touch the [Text/Prtd. Photo] key.
OK
(5)
(4) Darken light colours with the
Text/Photo
Map
(5) Touch the [OK] key.
3
Select the destination and then press the
[START] key.
[OK] key.
5 levels are available for the exposure. Darken light
originals with the key, and lighten dark originals
with the key.
key.
Cancel scanning
81