Sony DCR-TRV320 Service Manual page 19

Recording a picture
Self-timer recording
Recording with the self-timer starts in 10 seconds
automatically.
This mode is useful when you want to record
yourself. You can also use the Remote
Commander for this operation.
(1) Press (self-timer) in the standby mode.
The (self-timer) indicator appears on the
LCD screen or in the viewfinder.
(2) Press START/STOP.
Self-timer starts counting down from 10 with
a beep sound. In the last two seconds of the
countdown, the beep sound gets faster, then
recording starts automatically.
START/STOP
1
(self-timer)/
(таймер самозапуска)
To stop the self-timer recording
Press START/STOP.
Use the Remote Commander for convenience.
To record still images using the self-
timer
Press PHOTO in step 2. (P. 43)
To cancel self-timer recording
Press (self-timer) so that the indicator
disappears from the LCD or viewfinder screen
while your camcorder is in the standby mode.
Note
The self-timer recording mode is automatically
cancelled when:
– Self-timer recording is finished.
– The POWER switch is set to OFF (CHARGE),
VTR (DCR-TRV620E) or PLAYER (DCR-
TRV420E/TRV520E).
30
Checking the recording
– END SEARCH / EDITSEARCH / Rec
Review
Rec Review
You can check the section which you have
stopped most recently.
Press the – (7) side of EDITSEARCH
momentarily in the standby mode.
The section you have stopped most recently will
be played back for a few seconds, and then your
camcorder will return to the standby mode. You
can monitor the sound from the speaker or
headphones.
Notes
•END SEARCH, EDITSEARCH and Rec Review
work only for tapes recorded in the Digital8
system.
•If you start recording after using the end search
function, occasionally, the transition between
the last scene you recorded and the next scene
may not be smooth.
•Once you eject the cassette after you have
recorded on the tape, the end search function
does not work.
If a tape has a blank portion in the recorded
portions
The end search function may not work correctly.
32
Запись изображения
Запись по таймеру самозапуска
(1)
(2)
2
Для остановки таймера самозапуска
Для записи неподвижных
изображений с помощью таймера
самозапуска
Для отмены записи по таймеру
самозапуска
Примечание
Проверка записи
– END SEARCH / EDITSEARCH /
Просмотр записи
Просмотр записи
7
Примечания
Если на ленте между записанными
частями имеется незаписанный участок
Checking the recording
– END SEARCH / EDITSEARCH /
Rec Review
You can use these buttons to check the recorded
picture or shoot so that the transition between
the last recorded scene and the next scene you
record is smooth.
END SEARCH
You can go to the end of the recorded section
after you record.
Press END SEARCH in the standby mode.
The last 5 seconds of the recorded section are
played back and returns to the standby mode.
You can monitor the sound from the speaker or
headphones.
EDITSEARCH
You can search for the next recording start point.
Hold down the +/– (7) side of EDITSEARCH in
the standby mode. The recorded section is played
back.
+: to go forward
– : to go backward
Release EDITSEARCH to stop playback. If you
press START/STOP, re-recording begins from
the point you released EDITSEARCH. You
cannot monitor the sound.
— Playback – Basics —
Playing back a tape
You can monitor the playback picture on the
LCD screen. If you close the LCD panel, you can
monitor the playback picture in the viewfinder.
You can control playback using the Remote
Commander supplied with your camcorder.
(1) Install the power source and insert the
recorded tape.
(2) Set the POWER switch to VTR (DCR-
TRV620E) or PLAYER (DCR-TRV420E/
TRV520E) while pressing the small green
button. The video control buttons light up.
(3) Open the LCD panel while pressing OPEN.
(4) Press m to rewind the tape.
(5) Press N to start playback.
(6) To adjust the volume, press either of the two
buttons on VOLUME. The speaker on your
camcorder is silent when the LCD panel is
closed.
2
3
To stop playback
Press x.
1-7
Проверка записи
– END SEARCH / EDITSEARCH /
Просмотр записи
EDIT SEARCH
END
SEARCH
END SEARCH
EDITSEARCH
7
— Воспроизведение – Основные положения —
Воспроизведение
ленты
(1)
(2)
(3)
m
(4)
N
(5)
(6)
4
REW
5
PLAY
6
1
Для остановки воспроизведения
x
31
33