Sony DCR-TRV320 Service Manual page 178

3-1-2. Precautions on Adjusting
1) The adjustments of this unit are performed in the VTR mode
or camera mode.
To set to the VTR mode, set the power switch to "VTR or
PLAYER" or set the "Forced VTR Power ON mode" using the
adjustment remote commander (Note 1).
To set to the Camera mode, set the power switch to "CAMERA"
or set the "Forced Camera Power ON mode" using the
adjustment remote commander (Note 2).
After completing adjustments, be sure to exit the "Forced VTR
Power ON Mode" or "Forced Camera Power ON Mode".
(Note 3)
2) The front panel block (MI-37 board, focus dial, microphone
unit) need not be connected except during "Battery end
adjustment" and "IR transmitter adjustment". To remove,
disconnect the following connectors.
VC-235 board CN1111 (32P 0.5 mm)
3) By setting the "Forced VTR Power ON mode" or "Forced
Camera Power ON mode", the video section can be operate
even if the cabinet (R) block (Camera function switch (CF-69/
70/72 board), LCD block, viewfinder) has been removed. But
removing the cabinet (R) block (removing the VC-235 board
CN1105) means removing the lithium 3 V power supply (CF-
69/70/72 board BH001), data such as date, time, user-set menus
will be lost. After completing adjustments, reset these data. If
the cabinet (R) block has been removed, the self-diagnosis data,
data on history of use (total drum rotation time etc. ) will be
lost. Before removing, note down the self-diagnosis data and
data on history use (data of page: 2, address: A2 to AA). (Refer
to "SELF-DIAGNOSIS FUNCTION" for the self-diagnosis
data, and to "5-4. Service Mode" for the data on the history
use) To remove the cabinet (R), disconnect the following
connectors.
1. VC-235 board CN1105 (45P, 0.5 mm)
2. VC-235 board CN1109 (8P, 1.0 mm)
4) The lens block (CD-242/244/266/267/270/271 board) and the
intelligent accessory shoe need not be connected except during
"Battery end adjustment". To remove, disconnect the following
connectors.
1. VC-235 board CN1501 (16P, 0.5 mm)
2. VC-235 board CN1551 (24P, 0.5 mm)
3. Intelligent accessory shoe (8P, 0.8 mm)
Note 1: Setting the "Forced VTR Power ON" mode (VTR mode)
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 02, and press the
PAUSE button of the adjustment remote commander.
The above procedure will enable the VTR power to be
turned on with the power switch (SS-10000 block)
removed.
After completing adjustments, be sure to exit the
"Forced VTR Power ON mode".
Note 2: Setting the "Forced Camera Power ON" mode (Camera
mode)
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press the
PAUSE button of the adjustment remote commander.
The above procedure will enable the camera power to
be turned on with the power switch (SS-10000 block)
removed.
After completing adjustments, be sure to exit the
"Forced Camera Power ON mode".
Note 3: Setting the "Forced Memory Power ON" mode (Memory
mode)
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 05, and press the
PAUSE button of the adjustment remote commander.
The above procedure will enable the memory power to
be turned on with the power switch (SS-10000 block)
removed.
After completing adjustments, be sure to exit the
"Forced Memory Power ON mode".
Note 4: Exiting the "Forced Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press the
PAUSE button of the adjustment remote commander.
3) Select page: 0, address: 01, and set data: 00.
Note 5: 2.5 LCD model: DCR-TRV320/TRV320E/TRV320P
3 LCD model: DCR-TRV420E/TRV525
3.5 LCD model: DCR-TRV520/TRV520E/TRV520P/
4 LCD model: DCR-TRV720/TRV720E
2.5 LCD model
3/3.5 LCD model
4 LCD model
Note 6: 720H model: DCR-TRV320/TRV320P/TRV520/
TRV520P/TRV525/TRV720
960H model: DCR-TRV320E/TRV420E/TRV520E/
TRV620E/TRV720E
720H model
960H model
5-41
TRV620E
CF board
CF-69
CF-70
CF-72
CD board
2.5 LCD model CD-242
3/3.5 LCD model CD-266
4 LCD model CD-270
2.5 LCD model CD-244
3/3.5 LCD model CD-267
4 LCD model CD-271