Grizzly ALB 1815 Lion Instructions For Use Manual page 46

GB
operated power tools (with power
cord) and to battery-operated pow-
er tools (without power cord).
1) WORK AREA SAFETY
• Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
• Do not operate power tools in
explosive atmospheres, such
as in the presence of flam-
mable Iiquids, gases or dust.
Power tools create sparks which
may ignite the dust or fumes.
• Keep children and bystanders
away while operating a power
tool. Distractions can cause you
to lose control.
2) ELECTRICAL SAFETY
• Power tool plugs must match
the outlet. Never modify
the plug in any way. Do not
use any adapter plugs with
earthed (grounded) power
tools. Unmodified plugs and
matching outlets will reduce
risk of electric shock.
• Avoid body contact with
earthed or grounded surfaces,
such as pipes, radiators, rang-
es and refrigerators. There is an
increased risk of electric shock if
your body is earthed or grounded.
• Do not expose power tools to
rain or wet conditions. Water
entering a power tool will increase
the risk of electric shock.
• Do not abuse the cord. Never
use the cord for carrying, pulling
or unplugging the power tool.
Keep cord away from heat, oil,
46
sharp edges or moving parts.
Damaged or entangled cords in-
crease the risk of electric shock.
• When operating a power tool
outdoors, use an extension
cord suitable for outdoor
use. Use of a cord suitable for
outdoor use reduces the risk of
electric shock.
3) PERSONAL SAFETY
• Stay alert, watch what you
are doing and use common
sense when operating a pow-
er tool. Do not use a power
tool while you are tired or
under the influence of drugs,
alcohol or medication. A mo-
ment of inattention white oper-
ating power tools may result in
serious personal injury.
• Use personal protective
equipment. Always wear eye
protection. Protective equip-
ment such as dust mask, non-
skid safety shoes, hard hat, or
hearing protection used for ap-
propriate conditions will reduce
personal injuries.
• Prevent unintentional start-
ing. Ensure the switch is in
the off-position before con-
necting to power source and/
or battery pack, picking up
or carrying the tool. Carrying
power tools with your finger on
the switch or energising power
tools that have the switch on in-
vites accidents.
• Remove any adjusting key
or wrench before turning the
power tool on. A wrench or a
key left attached to a rotating