Grizzly ALB 1815 Lion Instructions For Use Manual page 44

GB
7 Battery
8 Battery charger
9 Release buttons
10 Battery charge state indicator
Technical data
Appliance
Motor voltage ..................18 V
Idling speed ...... max. 12000 min
Air speed ........................max. 200 km/h
Weight (without battery charger) .... 1.7 kg
Sound pressure level
(L ) ......................... 71 dB(A), K
pA
Sound power level (L
guaranteed .............................. 85 dB(A)
measured ............. 81.2 dB(A), K
Vibration (a ) ......... < 2.5 m/s
h
Battery (Li-Ion) .............................. AP-18
Nominal voltage .........................18 V
Capacity ...................................... 1.5 Ah
Battery cells......................................... 5
Charging time ...................... approx. 5 h
Recharger .................... JLH082100350G
Nominal consumption.................... 12 W
Uptake voltage / Input
.............................. 100-240 V~50/60 Hz
Voltage output / Output ..21 V
Protection class ..............................
Protection category ........................IPX0
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
Technical and optical changes may be
undertaken in the course of further de-
velopment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
44
1.5 Ah
(rpm)
-1
= 3 dB
pA
)
WA
=3 dB
WA
, K=1.5 m/s
2
350 mA
II
instruction manual can therefore not be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
2
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool is
turned off and times when the tool
is turned on but is running idle).
Safety instructions
Ensure that the safety instructions
are observed when operating the
blower.
Symbols and icons
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols (the
instruction is explained at
the place of the exclamation
mark) with information on
preventing damage.