Setscrew A
Setscrew B
Setscrew C
Front cover
Setscrew D
Setscrew E
LCD
connector
Printed circuit board A
Changing external parts (4)
Printed circuit
board K
connector
4
Front cover
To remove:
1. Remove the face plate, top cover and belt cover (refer
to pages 1 and 2).
2. Loosen the setscrews A, B, C, D and E (6 pcs.).
3. Disconnect the LCD connector and printed circuit
board K connector from the printed circuit board A.
Remove the front cover.
To attach:
1. Follow the steps of removal procedure in reverse.