Changing External Parts (6) Front Cover - ELNA 8300 Service Manual

Model 8300

Changing External Parts (6) Front Cover

B
A
C
D
E
Front cover
To remove:
1. Remove the face cover, belt cover, base cover and
top cover. (See pages 3-5).
H
2. Remove Screw
guide (lower)
3. Remove Screw
4. Loosen Screws
5. Disconnect the each connector and remove the front
cover.
Note: Disengage the Hooks
cover.
A
Screw
B
Arm thread guide (Lower)
C Screw
D Screw
E
Screw
Hooks (2 spots)
F
To attach:
6. Follow the above procedure in reverse.
Note: See pages 19 (Diagram) for Connectors
8
A
and remove the Arm thread
B .
.
C
, 3 turns.
D E
H to remove the Front
Connection.