Front Cover - ELNA Star Edition Service Manual

SERVICE ACCESS (3-1)

FRONT COVER

TO REMOVE:
1. Remove the face cover (see page 4).
2. Loosen the setscrew (A) and (B) then remove the setscrew (C) and (D).
3. Remove the cap and loosen setscrew (E).
4. Disconnect all the connectors from the circuit board-A.
NOTE:
Do not disconnect the connectors by pulling on cord.
To disconnect, grasp the connector, not the cord.
(To be continued)
Cap
Setscrew (A)
Setscrew (E)
Setscrew (C)
Setscrew (D)
Setscrew (B)
6