Use the Navigation key to highlight Yes or No, then press the
4.
confirmation message appears in the display while your messages are
being erased. Your phone then returns to the Security menu.
Reset Phone
Reset Phone returns all setup parameters (except for the Contacts entries) to their
factory default values.
Caution!: Before selecting Reset Phone, contact your Wireless Carrier. Invoking Reset Phone may erase
settings made by your Wireless Carrier from your phone, resulting in loss of service.
In standby mode, press the MENU key (
1.
Settings), and
The "Lock" prompt appears in the display.
Enter the four-digit lock code using the keypad.
2.
Note: The default lock code is the last four digits of your mobile phone number.
The "Lock" prompt disappears and the Security menu appears in the
display.
Press
3.
pqrs
default settings (except for Contacts
Use the Navigation key to highlight Yes or No, then press the
4.
confirmation message appears in the display while your phone is being
reset to factory default settings. Your phone then returns to the Security
menu.
Call Options
The Call Options sub-menu lets you set call options such as Auto Retry, Data rates
for data calls, and more.
Auto Retry
Auto Retry automatically re-dials a number if there is no answer or the dialed party is
busy. Depending upon your location, the number of times your phone redials a
number may vary.
In standby mode, press the MENU key (
1.
Settings),
options appear in the display:
• Off
128
for Security.
jkl
for Reset Phone. A prompt appears in the display to restore
(for Call Options), and
mno
mno
), then press
OK
).
), then press
OK
for Auto Retry. The following
@
key. A
OK
(for
wxyz
wxyz
key. A
OK
(for
wxyz
wxyz