Verizon Fios User Manual page 33

4. After pressing the unifed button (WPS) on your Router, you
have two minutes to press the WPS button on the client
device before the WPS session times out.
When the unifed button (WPS) on your Router is pressed,
the Router Status LED on the front of your Router begins
flashing blue. The flashing continues until WPS pairing to the
client device completes successfully. At this time, the Router
Status LED turns solid blue.
If WPS fails to establish a connection to a Wi-Fi client device
within two minutes, the Router Status LED on your Router
flashes red for two minutes to indicate the WPS pairing
process was unsuccessful. After flashing red, the light
returns to solid white to indicate that Wi-Fi is on.
Note: Wi-Fi Protected Setup (WPS) cannot be used if WPA3
security is enabled or SSID broadcast is disabled or if MAC
address authentication is enabled with an empty white list.
CONNECTING a WI-FI DEVICE USING a PaSSWORD
1. Verify each device that you are connecting with Wi-Fi has
built-in Wi-Fi or an external Wi-Fi adapter.
2. Open the device's Wi-Fi settings application.
3. Select your Fios Router's Wi-Fi network name (SSID) from
the device's list of discovered Wi-Fi networks.
verizon.com/fos |
02 / CONNECTING YOUR
©2020 Verizon. All Rights Reserved
FIOS ROUTER
33