ComputER nEtWoRk ConFiguRation
2.
Enable the protected setup by moving the selector to On
3.
Use one of the following methods:
•
If your Wi-Fi client device has a WPS button, press the
unifed button on your Router for more than two seconds,
then click the WPS button on your Wi-Fi device (client) to
start the WPS registration process.
•
If your client device has a WPS PIN, locate the PIN
printed on the client's label or in the client documentation.
Enter the PIN number in the Clien
Client WPS PIN
Clien
enrollmen
enr
ollment t on the user interface.
•
Click R R egis
•
Alternatively, you can enter the Router's PIN shown on
this screen into the WPS user interface of your device, if
this PIN mode is supported by your Wi-Fi device.
t WPS PIN feld is located in the section 2 - PIN
egist t er er.
Client WPS PIN
t WPS PIN feld. The
On.
2 - PIN