Selecting The Automatic Operating Mode - Samsung SH09BWHA Owner's Instructions Manual

Selecting the Automatic Operating Mode

You can start the air conditioner in Auto mode from your remote
control. In the Auto mode, the cooling and heating operation is
selected automatically. You can also raise or lower the temperature
and the fan speed in the Auto mode.
1 If necessary, press the
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
2 If the is not displayed at the top of the remote control,
press the button on the remote control one or more times until it
appears.
Result: The indoor unit beeps each time you press the
The air conditioner runs in the Auto mode.
The Auto mode cools and heats the room in optimum condition
by adjusting the indoor temperature depending on the set
temperature.
The mode may change from cooling into heating, from heating
into cooling depending on the current temperature during
operation.
N N o o t t e e You can change modes at any time.
N N o o t t e e
3
To adjust the temperature, press the
until the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result: Each time you press the
- The temperature is adjusted by 1°C
- The indoor unit beeps
button.
button one or more times
button:
button.
9
E-