4.6
Automatic connection with GOT
When the automatic connection is enabled in the GOT2000 series, the inverter can communicate with the GOT2000
series with only setting the station number and connecting the GOT. This eliminates the need for the communication
parameter setting.
Pr.
Pr.
Name
group
RS-485
331
N030
communication
station number
When Pr.549 Protocol selection = "1" (MODBUS RTU protocol), the setting range is as shown in the parentheses.
When the set value is outside of the setting range, the initial value is applied.
4.6.1
Automatic connection system configuration
88
PARAMETER
Initial
Setting
value
range
0 to 31
0
(0 to
247)
Four-wire multidrop
GOT2000
Set the inverter station numbers.
The inverter station number setting is required when multiple inverters are
connected to one GOT (RS-485 terminal communication).
Description
Terminating resistor