Combination of data 1 and data 2 for reply
Data type
Inverter status monitor
0
(extended)
Inverter status monitor
1
(extended)
Error code for sending data 1 is set in error code 1, and error code for sending data 2 is set in error code 2.
Mode error (HA), instruction code error (HB), data range error (HC) or no error (HF) is replied. (Refer to the Instruction Manual (Detailed)
of the inverter for the details of the error codes.)
58
PARAMETER
Data 1
Output frequency (speed)
Special monitor
Data 2
Inverter status monitor (extended) is same as
instruction code H79 (Refer to
Replys the monitor item specified in instruction code
HF3 for special monitor. (Refer to the Instruction
Manual (Detailed) of the inverter.)
Remarks
page
56)