Juniper Mesa 2 How-To page 3
How to activate verizon wireless on os 18323
Hide thumbs
Also See for Mesa 2:
- Owner's manual (86 pages) ,
- Manual (2 pages) ,
- Installation and usage information (2 pages)
Advertisement
4. If still needed, perform a Shut Down then insert the SIM card (with applying adhesive tape for a
pull tab). Otherwise, perform a Restart.
5. Once the unit has finished powering back on and rebooting, check the status under Cellular. It
should now show Verizon and state "Getting ready..." for a minute or two. The setup should be
complete when the status changes to Connected.
Advertisement
