Husqvarna Automower 210 C Technical Manual page 76

Hide thumbs Also See for Automower 210 C:
Table of Contents

Advertisement

4. AUTOCHECK, SERVICE PROGRAM
The Transmit data function can also be accessed by
clicking on the Transmit data button in the Copy all
data to new control box.
After replacing the control box:
5.
Ensure that the mower is connected correctly and
that the main switch is turned ON.
6.
Select the file you wish to transmit from the list in
the Transmit data from box.
If you would like to keep the file after it has been
transmitted to the mower you will need to
deselect the Delete file after transmission
checkbox.
7.
Click on Transmit.
8.
Click OK when the message Settings changed is
displayed.
Operating
history: Operating data
This function largely includes the same information as
Key data. The difference is that the values under
Operating data, trip can be reset, just as a mileage
counter on a car can be reset. This function is ideal to
use when you wish to see how a mower works during a
specific period.
To reset: Click on the Reset button. The values are
reset and the current date is entered on the Reset row.
Operating history: Fault memory
This list displays the last 50 faults to occur (100 for 220
AC without GSM). The fault is displayed with the date
and time and where the last fault to occur is shown at
the top of the list.
You can change the displayed order as required:
Click on Date to change between the between first
and last faults.
Click on Fault to show the faults in alphabetical
order.
Selecting a row with a specific fault from the fault list,
displays an extract from the fault tracing guide (see
page 104) in the Fault tracing box. To the left of the
box the possible cause of the fault is listed, and to the
right fault tracing tips and actions are stated.
Clicking on the Table, frequency button allows you to
display a summary of the faults that have occurred on
the connected mower and how many times each fault
has occurred.
All occurring faults saved in the fault memory can be
deleted:
1.
Click on Clear Fault memory.
2.
Click Yes when asked Clear fault memory list?
76 - English
, trip

Advertisement

Table of Contents
loading

Table of Contents