Table of Contents
Advertisement
Anti-Shake(HDIS)
Use the Anti-Shake(HDIS) function to compensate for unstable
images caused by shaking movements while holding the camcorder.
Select the recording (
button.
page 26
1
Press the [MENU] button
[Control (Left/Right)] button
Anti-Shake(HDIS).
2
Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3
Press the [MENU] button to exit the menu.
Submenu Items
Items
Off
To disable the function.
To enable the Anti-Shake(HDIS) function to
On
compensate for shaking movements.
) mode by pressing the [MODE]
STBY
[254Min]
Anti-Shake(HDIS)
Off
On
Exit
On-screen
Use
display
-
Use the Anti-Shake function in the following cases
•
When recording while using the zoom extensively.
•
When recording a close up picture of a small object.
•
When recording while walking, or in a moving car.
•
The camcorder automatically activates the Anti-Shake(HDIS)
function in the Smart Auto mode.
•
Gross camcorder shake may not be entirely corrected even if Anti-
Shake(HDIS) is On. Firmly hold the camcorder with both hands.
•
When this function is On, the actual movement of the subject and
the movement displayed on the screen may be slightly different.
•
When recording in dark lighting at high magnification while
this function is On, after-images may stand out. In this case,
we recommend using a tripod (not supplied) and turning Anti-
Shake(HDIS) to Off.
Advanced recording
59
Advertisement
Table of Contents
