Samsung SMX-F400BN User Manual
Samsung memory camcorder user manual
Hide thumbs
Also See for SMX-F400BN:
- User manual (131 pages) ,
- Manual del usuario (128 pages) ,
- User manual (131 pages)
Related Manuals for Samsung SMX-F400BN
Summary of Contents for Samsung SMX-F400BN
-
Page 1: User Manual
User Manual Memory Camcorder www.samsung.com/register SMX-F40BN/SMX-F40SN/SMX-F40RN/SMX-F40LN SMX-F400BN/SMX-F400SN/SMX-F400RN/SMX-F400LN SMX-F43BN/SMX-F43SN/SMX-F43RN/SMX-F43LN SMX-F44BN/SMX-F44SN/SMX-F44RN/SMX-F44LN... - Page 2 High-resolution color widescreen LCD (2.7” WIDE TFT LCD) Samsung memory camcorder utilizes a 2.7-inch 230k pixel Widescreen LCD which allows bright and clear monitoring. In addition, the LCD Enhancer adjusts color and brightness to the screen lighting conditions for better monitoring under strong sunlight.
- Page 3 Capture visions further than the eye can see : 52x Optical Power Zoom, 65x Intelli- Zoom, and 2200x Digital Zoom Samsung's powerful optical zoom lenses bring the world closer without losing image quality. In addition, Digital Zoom Interpolation enables clearer digital zooming, with less distortion than previous types of digital zooms.
-
Page 4: Before Reading This User Manual
Please follow them explicitly. After reading this section, keep it in a safe place for future reference. PRECAUTIONS • This camcorder should always be connected to an AC outlet with a protective grounding connection. • Batteries should not be exposed to excessive heat such as sunshine, fire or similar. -
Page 5: Important Information On Use
• The recorded contents cannot be compensated for: - Samsung cannot compensate for any damage caused when a recording cannot be played back because of a defect in the camcorder or memory card. - Page 6 Notes regarding trademarks • All the trade names and registered trademarks mentioned in this manual or other documentation provided with your Samsung product are trademarks or registered trademarks of their respective holders. • The SD logo is a trademark. The SDHC logo is a trademark.
-
Page 7: Important Safety Instructions
CAMCORDER and to protect it from overheating. These openings must not be blocked or covered. Never place your CAMCORDER on a bed, sofa, rug, or other similar surface: on or near a radiator or heat register. This CAMCORDER should... - Page 8 When the power-supply cord or plug is damaged. b. If any liquid has been spilled onto, or objects have c. If the CAMCORDER has been exposed to rain or d. If the CAMCORDER does not operate normally ANTENNA...
-
Page 9: Fcc Warning
Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. For details see lamprecycle.org, eiae.org, or call 1-800-Samsung (7267864) CALIFORNIA USA ONLY This Perchlorate warning applies only to primary CR (Manganese Dioxide) Lithium coin... -
Page 10: Safety Information
60 ℃ (140 ℉) may result in fire. Keeping the battery at a high temperature may cause an explosion. No oil! Oil entering the camcorder or AC power adaptor could cause electric shock, malfunctions or defects. Do not disconnect the AC adaptor... - Page 11 There is a risk of electric shock. If the camcorder makes an abnormal sound, or smell or smokes, unplug the power-cord immediately and request service from a Samsung service center. There is a risk of fire or personal injury.
- Page 12 Insecticide entering the camcorder could cause the product to fail to operate normally. Turn the camcorder off and cover it with vinyl sheet, etc. before using insecticide. Do not use the camcorder on a tripod (not supplied) in a place where it is subject to severe vibrations or impact.
- Page 13 Other manufacturers of optional accessories compatible with this camcorder is responsible for their own products. Use the optional accessories according to the safety instructions. Samsung shall not be responsible for any malfunction and risk of fire, electric shock and damages occurred by using unauthorized accessories.
-
Page 14: Table Of Contents
START GUIDE GETTING TO KNOW THE CAMCORDER IDENTIFYING THE SCREEN DISPLAYS BASIC OPERATION OF THE CAMCORDER ABOUT THE STORAGE MEDIA BASIC RECORDING BASIC PLAYBACK You can record videos in H.264 format! What's included with your camcorder Location of controls... - Page 15 RECORDING OPTIONS PLAYBACK OPTIONS SYSTEM SETTING Changing the menu settings Menu items iSCENE Video Resolution Photo Resolution 16:9 Wide White Balance Aperture Shutter Speed EV (Exposure Value) C.Nite Focus Anti-Shake(HDIS) Digital Effect Fader Wind Cut Zoom Type Time Lapse REC Guideline Menu items Multi View Option...
- Page 16 Connecting to a normal (standard definition) TV (16:9/4:3) Dubbing to a VCR or DVD/HDD recorder Checking your computer type What you can do with a Windows computer Using the intelli-studio program Using as a removable storage device Troubleshooting Maintenance Additional information Using your camcorder abroad...
-
Page 17: Quick Start Guide
This quick start guide introduces the basic operation and features of your camcorder. See the reference pages for more information. You can record videos in H.264 format! You can record videos in H.264 format that is convenient to email and share with your friends and family. -
Page 18: Taking Photos
0:00:00 [475Min] • Your camcorder is compatible with H.264 recording format, which achieves effi cient coding of high quality video with less capacity. • You can record videos in SD (standard defi nition). The default setting is “TV Fine (720x480/60i).”... -
Page 19: Viewing On A Tv
Simple and fun! Enjoy the various features of Intelli-studio on your Windows computer. Using the Intelli-studio program built in your camcorder, you can import video/photos onto your computer, edit or share the videos/photos with your friends. For details, see pages 98~101. - Page 20 Viewing the videos/photos from your PC 1. Launch the Intelli-studio program by connecting the camcorder to your PC via the USB cable. • A new file saving screen appears with the Intelli-studio main window. Click “Yes,” the uploading procedure will start.
-
Page 21: Getting To Know The Camcorder
• The contents may vary depending on the sales region. • Parts and accessories are available for purchase at your local Samsung dealer. SAMSUNG is not responsible for reduced battery life time or malfunctions caused by any unauthorized use of accessories such as the AC adaptor or the batteries. -
Page 22: Location Of Controls
LOCATION OF CONTROLS Front & Left View VARIOPLAN f=2.1-109.2mm F:1.8 ❶ ❷ ❸ ❹ Lens MENU button Control joystick (////OK), Zoom (W/T) joystick Recording start/stop button LCD screen Memory card/Jack cover ⓐ USB jack ( ⓑ... - Page 23 Right Top & Bottom View ❶ ❷ ❸ 1 Zoom lever (W/T) 2 PHOTO button 3 Grip belt 4 Grip belt hook Be careful not to cover the internal microphone and lens during recording. Rear View 1 Mode indicator : Record mode (Video/Photo) : Play mode 2 Recording start/stop button 3 Battery pack slot...
-
Page 24: Identifying The Screen Displays
• For enhanced performance, the display indications and the order are subject to change without prior notice. • This camcorder provides one combined video and photo record mode. You can easily record videos or photos in the same mode without having to change it. - Page 25 SCENE • The illustration above shows the EV (Exposure Value) screen. • Functions marked with * will not be kept when the camcorder restarts. • The shortcut menu (OK guide) represents the most frequently accessed functions according to the selected mode. Pressing the OK button will display a shortcut menu of frequently used functions on the LCD screen.
- Page 26 identifying the screen displays Video Play mode PRECHECK! • This On Screen Display (OSD) is shown in Video play ( • Press the MODE button to select the Play ( Normal View 0:00:55 Photo 0:00:00/0:00:55 JAN/01/2010 12:00 AM ) mode only. ) mode.
- Page 27 SCENE Multi View JAN/01/2010 12:00 AM 0:00:00/0:00:55 100-0001 0:00:00/0:00:55 100-0001 Video Play mode : Shortcut menu (OK Guide) Forward playback search page 42 (Skip/Search/Slow motion/ Frame-by-frame) Volume Down Play () / Pause ( ❙ ❙ Reverse playback search page 42 (Skip/Search/Slow motion/ Frame-by-frame) Volume Up Video Play mode : Single (Volume)
-
Page 28: Photo Play Mode
Photo play mode PRECHECK! • This On Screen Display (OSD) is shown in Photo Play ( • Press the MODE button to select the Play ( Normal View 100-0001 Video Multi View ) mode only. ) mode. page 24 1/10 Move Full View SCENE... -
Page 29: Preparation
This section provides information that you should know before using this camcorder: such as how to use the provided accessories, how to charge the battery, and how to setup the operation mode and initialise setup. ATTACHING THE GRIP BELT... -
Page 30: Connecting A Power Source
• Use only Samsung-approved battery packs. Do not use batteries from other manufacturers. Otherwise, there is a danger of overheating, fi re or explosion. • Samsung is not responsible for problems occurring due to using unapproved batteries. -
Page 31: Charging The Battery
• When charging, if both the USB cable and AC power adaptor are connected, the AC power adaptor will override the USB. • If the camcorder is turned on, the battery will still charge, but more charging time will be needed. It is recommended you to keep the camcorder turned off while charging. -
Page 32: Checking The Battery State
Change the battery pack as soon as possible. (fl ickers): The device will be forced to turn off after • Before using the camcorder, charge the battery. • Above fi gures are based on a fully charged battery pack at normal temperature. - Page 33 The recording time is affected by temperature and environmental conditions. • We recommend only using the original battery pack that is available from your Samsung retailer. When the battery reaches the end of its life, please contact your local dealer. The batteries have to be dealt with as chemical waste.
- Page 34 Using an AC power source It is recommended that you use the AC power adaptor to power the camcorder from a household AC outlet when you perform settings on it, play back, or edit images, or use it indoors. Make the same connections as you do when charging the battery pack.
-
Page 35: Basic Operation Of The Camcorder
When using this camcorder for the first time • When you use your camcorder for the first time or reset it, the time zone screen appears for the startup display. Select your geographical location and set the date and time.page 28 If you do not set the date and time, the time zone screen appears every time you turn on the camcorder. -
Page 36: Setting The Operation Modes
Mode Record mode Play mode • This camcorder provides one record mode for both video and photo recordings. You can easily record videos or photos in the same mode without having to switch modes. USING THE DISPLAY( Switching the information display mode You can switch the on-screen information display mode. -
Page 37: Using The Back Light Touch Button
USING THE BACK LIGHT TOUCH BUTTON When a subject is lit from behind, this function will compensate for lighting so that the subject is not too dark. Touch the Back Light ( ) touch button to display ) icon on the screen. To cancel, touch the Back Light ( ) touch button again. -
Page 38: Shortcut Menu (Ok Guide)
SHORTCUT MENU (OK GUIDE) The Shortcut menu (OK guide) represents the most frequently accessed functions according to the selected mode. ✪ For example: Setting EV (Exposure Value) in the Record mode using the Shortcut menu (OK guide). -
Page 39: Shortcut Function Using The Control Joysticks
SHORTCUT FUNCTION USING THE CONTROL JOYSTICKS Button Record ( ) mode SCENE - Access the shortcut menu - Confirm selection - Exit the shortcut menu - iSCENE - Zoom (wide) - Focus - Zoom (tele) DOWN LEFT Quick View RIGHT SCENE Play ( ) mode... -
Page 40: Setting The Time Zone And Date/Time For The First Time
• The built-in battery is always recharged while your camcorder is connected to the AC power or while the battery pack is attached. If the camcorder is not in use for about 2 months without connecting to the AC power or attaching the battery pack, the built-in battery fully discharges. -
Page 41: Selecting The Languages
SELECTING THE LANGUAGES You can select the language that appears on the menu screen. The language setting is retained when the camcorder is powered off. 1. Press the MENU button Control joystick (/) “Settings.” 2. Move the Control joystick (/) to select “Language,” and then press the OK button. -
Page 42: About The Storage Media
• If there is no memory card inserted, only the built-in memory will be available. (SMX-F43/F44only) • Do not eject a memory card while it is being used in the camcorder. The memory card and its data may be damaged. -
Page 43: Inserting And Removing A Memory Card (Not Supplied)
4. Close the cover. • If a memory card is not inserted correctly, the camcorder may fail to operate normally or the memory card slot may be damaged. • Be careful when ejecting a memory card. If the memory card is pushed hard, it may pop out suddenly. -
Page 44: Selecting A Suitable Memory Card
SELECTING A SUITABLE MEMORY CARD Compatible memory cards • This camcorder can be used with SD (Secure Digital) and SDHC (Secure Digital High Capacity) cards. It is recommended to use an SDHC (Secure Digital High Capacity) card. SD cards up to 2GB are supported with this camcorder. -
Page 45: Notes On Use
• Be careful to keep the memory card out of the reach of children, who might swallow Notes on use • Samsung is not responsible for data loss due to misuse. • We recommend using a memory card case to avoid losing data from moving and static electricity. - Page 46 • The maximum size of a video (H.264/AVC) file that can be recorded at one time is 1.8GB. • The camcorder can store up to 9,999 files of videos and photos in one memory card. • Video (or photo) images recorded by other equipment are not playable on this camcorder.
-
Page 47: Basic Recording
• If power is interrupted or an error occurs during recording, the video may not be recorded/edited. • Samsung is not responsible for any damage occurred by a failure of normal recording or playback operation because of memory card error. -
Page 48: Taking Photos
• Audio is not recorded when taking photos. • If focusing is diffi cult, use the manual focus function. page 58 • Do not turn off the camcorder or remove the memory card when taking photos as it may damage the storage media or data. -
Page 49: Quick View Function In The Record Mode
The quick View function is not available in the following conditions: (The Quick View icon is dimmed in the Shortcut menu.) • If the mode has been changed after the recording or the camcorder is connected with the USB cable. • If the camcorder has been turned off and on again after the recording. -
Page 50: Recording With Ease For Beginners (Smart Auto Mode)
The camcorder may not detect the Portrait mode when recording a face, depending on a position of the face or brightness. • Depending on conditions such as lighting, shake of the camcorder, or distance to the subject, the same scene mode could be detected differently. •... -
Page 51: Zooming
Digital zooming is possible up to 2200x. Set “Zoom Type” to “Digital Zoom.” page 63 • The minimum possible distance between the camcorder and subject while maintaining sharp focus is about 0.39 inch (1cm) for wide-angle and about 39.4 inches (1m) for telephoto. -
Page 52: Basic Playback
In the thumbnail index view, you can directly select and display a desired image without using fast forwarding and rewinding. • This camcorder provides one combined video and photo record mode. You can easily record videos or photos in the same mode without having to change it. -
Page 53: Playing Back Videos
- Video fi les recorded by devices other than the camcorder - Video fi le formats that are supported • The built-in speaker automatically turns off when the Audio/Video cable is connected to the camcorder. (When connected to external devices, volume adjustment should be done on the connected external device.) •... -
Page 54: Various Playback Operations
basic playback Various playback operations Still playback (pause) (/ ) • Press the OK button during playback. To resume normal playback, press the OK button again. Search playback ( • During playback, move and hold the Control joystick () for forward search, or to the left for reverse search. -
Page 55: Viewing Photos
- A photo recorded on other devices. - A photo with a fi le format not supported on this camcorder (does not conform to DCF standards). • Loading time may vary depending on the size and quality of the selected photo. -
Page 56: Recording Options
CHANGING THE MENU SETTINGS You can change the menu settings to customize your camcorder. This chapter uses "Aperture" function in the Record mode as an example. . Using the MENU button 1. Open the LCD screen and press the Power ( the camcorder. -
Page 57: Menu Items
MENU ITEMS • Accessible items in menu vary depending on the operating mode. • For operation details, see the corresponding page. Recording menu items Items Record ( iSCENE Video Resolution Photo Resolution 16:9 Wide White Balance Aperture Shutter Speed C.Nite Focus Anti-Shake(HDIS) Digital Effect... -
Page 58: Iscene
This camcorder automatically sets the shutter speed and aperture according to the subject and brightness for optimum recording. You can also specify one of various modes depending on subject conditions, recording environment or purpose of fi lming. -
Page 59: Submenu Item
Video Resolution You can select the resolution of a video to be recorded. This camcorder can record in “TV Super Fine,” “TV Fine,” “TV Normal,” “Web Fine” and “Web Normal” modes. The “TV Fine” mode is set as the factory default. -
Page 60: Photo Resolution
“800x600 (4:3)” Records in 800x600 resolution. • Photos recorded by your camcorder may not be displayed on another device if it does not support high resolution. • For photo development, the higher the resolution, the fi ner the image quality. -
Page 61: 16:9 Wide
16:9 Wide You can select the desired LCD display aspect ratio for recording or playback (16:9 Wide/4:3 aspect ratio). PRECHECK! Select the Record ( ) mode by pressing the MODE button. page 24 1. Press the MENU button Control joystick (/) “16:9 Wide.” 2. -
Page 62: White Balance
White Balance This camcorder automatically adjusts the color of the subject. You can record in natural colors depending on the subject and lighting conditions. PRECHECK! Select the Record ( 1. Press the MENU button Control joystick (/) ... -
Page 63: To Set The White Balance Manually
Use this function for a more natural result. • When setting the white balance manually, the subject must be white, otherwise, your camcorder may not detect an appropriate setting value. -
Page 64: Aperture
Aperture The camcorder adjusts the aperture automatically depending on the subject and recording conditions. You can also manually adjust the Aperture to your preference. PRECHECK! Select the Record ( 1. Press the MENU button Control joystick (/) “Aperture”. -
Page 65: Shutter Speed
Shutter Speed The camcorder automatically sets the shutter speed depending on the scene's brightness. You can also manually adjust the shutter speed according to the scene conditions. PRECHECK! Select the Record ( ) mode by pressing the MODE button. page 24 1. - Page 66 1/250, 1/500, 1/1000 1/2000, 1/4000, 1/10000 Outdoor sports such as golf and tennis. • Do not aim at the sun. Doing so might cause your camcorder to malfunction. Take images of the sun only in low light conditions, such as at dusk.
-
Page 67: Ev (Exposure Value)
EV (Exposure Value) The camcorder usually adjusts the exposure automatically. You can also manually adjust the exposure depending on the recording conditions. PRECHECK! Select the Record ( ) mode by pressing the MODE button. page 24 1. Press the MENU button Control joystick (/) “EV.”... - Page 68 OK button. 3. Press the MENU button to exit the menu. Submenu Items items Disables the function. “Off” The memory camcorder automatically adjusts “Auto” image brightness. Record a brighter image by extending the low “1/30” shutter speed range to “1/30.”...
-
Page 69: Focus
Focus The camcorder usually focuses on a subject automatically (auto focus). When the camcorder is turned on, auto-focus will be always set. You can also manually focus a subject depending on the recording conditions. PRECHECK! Select the Record ( ) mode by pressing the MODE button. page 24 1. - Page 70 Focusing manually during recording: This camcorder automatically focuses a subject from close-up to infi nity. However, the correct focus may not be obtained depending on the recording conditions. In this case, use the manual focus mode. 1. Move the Control joystick (/) to select “Manual Focus.”...
-
Page 71: Anti-Shake(Hdis)
• Recording through the window, from inside a vehicle • The SMART AUTO mode automatically sets the Anti-Shake (HDIS) to On. • Gross camcorder shake may not be entirely corrected even if “Anti-Shake (HDIS): On” is set. Firmly hold the camcorder with both hands. -
Page 72: Digital Effect
recording options Digital Effect Using the digital effect function gives your recording a creative look. PRECHECK! Select the Record ( 1. Press the MENU button Control joystick (/) “Digital Effect.” 2. Select the desired submenu item with the Control joystick (/), and then press the OK button. -
Page 73: Fader
Fader You can give your recording a professional look by using special effects such as fade in at the beginning of a sequence or fade out at the end of a sequence. PRECHECK! Select the Record ( ) mode by pressing the MODE button. page 24 1. -
Page 74: Wind Cut
recording options Wind Cut Using the Wind Cut function, you can reduce wind noise when recording sound from the built-in microphone. PRECHECK! Select the Record ( 1. Press the MENU button Control joystick (/) “Wind Cut.” 2. Select the desired submenu item with the Control joystick (/), and then press the OK button. -
Page 75: Zoom Type
Zoom Type The memory camcorder offers three types of zoom: optical, intelligent and digital zoom when recording videos. PRECHECK! Select the Record ( ) mode by pressing the MODE button. page 24 1. Press the MENU button Control joystick (/) ... -
Page 76: Time Lapse Rec
Using the time lapse feature, your camcorder can be programmed to automatically record a number of frames over a period of time or with a certain time interval between each frame. For instance, a camcorder on a tripod (not supplied) in time lapse mode could be set up to shoot frames of a fl ower opening or a bird building a nest. - Page 77 • 30 captured images compose a video of 1 second length. Since the minimum length of a video to be saved by your camcorder is one second, the interval defi nes how long the Time Lapse Recording should be taken. For example, if you set the interval to “30 Sec,” Time Lapse Recording should be taken for at least 15 minutes to record a minimum video length of 1 second (30 images).
-
Page 78: Guideline
Guideline This camcorder provides 3 types of guidelines to help you to set a balanced image composition on the screen. PRECHECK! Select the Record ( 1. Press the MENU button Control joystick (/) “Guideline.” 2. Select the desired submenu item with the Control joystick (/), and then press the OK button. -
Page 79: Playback Options
playback options MENU ITEMS • Accessible items in the menu vary depending on the operation mode. • See pages 40~43 for playback information and button operation. • See pages 67~78 for details on menu items during playback. Playback menu items Items Multi View Option (Thumbnail index view only) -
Page 80: Multi View Option
playback options Multi View Option Multi View Option provides sorting thumbnails of recorded videos or photos by different display options. PRECHECK! • Press the MODE button to select the Play( • Select the Video or Photo thumbnail index view screen. page 40 1. -
Page 81: Play Option
Play Option You can set a specifi c playback style according to your preference. PRECHECK! • Press the MODE button to select the Play( • Select the Video thumbnail index view screen. page 40 1. Press the MENU button Control joystick (/) “Play Option.”... -
Page 82: Delete
• The Delete function does not operate if the battery charge is insuffi cient. It is recommended to use the AC power adaptor to avoid power-loss of the camcorder while deleting. ) mode. -
Page 83: Protect
Protect • You can protect saved important videos (or photos) from accidental deletion. • Protected images will not be deleted unless you release the protection or format the memory. PRECHECK! • Press the MODE button to select the Play( • Select the Video or Photo thumbnail index view screen. page 40 1. -
Page 84: Story-Board Print
playback options Story-Board Print This function captures 16 still images arbitrarily from the selected video and saves them into the storage media. It presents a quick overview of your video, helping you to understand the overall topic. PRECHECK! • Press the MODE button to select the Play( •... -
Page 85: Using View
Using VIEW This function provides a preview of the 16 image storyboard from a selected video. PRECHECK! • Press the MODE button to select the Play( • Select the Video thumbnail index view screen. page 40 1. Use the Control joystick (///) to select the desired videos, and then touch the VIEW touch button. -
Page 86: Copy (Smx-F43/F44 Only)
playback options Copy (SMX-F43/F44 only) • Movies and photos stored in the built-in memory can be copied to the external fl ash memory card. • Copying to the memory card does not delete originals in the built-in memory. PRECHECK! • Press the MODE button to select the Play( •... -
Page 87: Edit (Divide)
Edit (Divide) You can divide a video clip as many times as you want in order to delete a section you no longer need. The videos will be divided in groups of two. PRECHECK! • Press the MODE button to select the Play( •... -
Page 88: Edit (Combine)
playback options Edit (Combine) You can combine two different video clips. PRECHECK! • Press the MODE button to select the Play( • Select the Video thumbnail index view screen. page 40 1. Press the MENU button Control joystick (/) “Edit” Control joystick (//OK) ... -
Page 89: Slide Show
• To end the slide show, press the OK button again. • To return to the thumbnail view, move the Zoom lever. • 4 background music fi les are stored in the camcorder by default. When a slide show begins, it plays background music in arbitrary order. -
Page 90: Slide Show Option
3. Press the MENU button to exit the menu. File Info This camcorder shows you information on the recorded images. PRECHECK! • Press the MODE button to select the Play( 1. Press the MENU button Control joystick (//OK) ... -
Page 91: System Setting
• There are some functions you cannot activate simultaneously in the menu. You cannot select the grey menu items. • Items marked with * are available only with models SMX-F43/F44. • Items marked with ** are available only when the camcorder is supplied the power using the battery pack. Play mode... -
Page 92: Storage Type (Smx-F43/F44 Only)
system setting Storage Type (SMX-F43/F44 only) You can record videos (or photos) on the built-in memory or a memory card, so you should select the desired storage media before starting recording or playback. 1. Press the MENU button Control joystick (/) “Settings” Control joystick (//OK) ... -
Page 93: Format
• If the recording medium becomes corrupted, format it again. • Do not format the storage media on a PC or other device. Make sure to format the storage media on this camcorder. • Format the memory card in the following cases:... - Page 94 It is convenient when you want to manage your fi les on a computer. Time Zone You can easily set the clock to the local time when using your camcorder while travelling. 1. Press the MENU button Control joystick (/) “Settings” Control joystick (//OK) ...
- Page 95 Setting the clock to the local time (“Visit”) You can easily set the clock to the local time zone when travelling. 1. Move the Control joystick (/) to select the “Time Zone” in Settings mode, and then press the OK button. •...
-
Page 96: File No
system setting Date/Time Set By setting the date and time, you can display the date and time of the recording during playback. Press the MENU button Control joystick (/) “Settings” Control joystick (//OK) “Date/Time Set.” 2. Select the date and time information, and change the setting values by using the Control joystick (///). -
Page 97: Time Type
Displays the current date and time. “Date & Time” The date/time will read “JAN/01/2010 12:00 AM” in the following cases; - When video or photo recording was made before setting the date/time in the camcorder. - When the built-in rechargeable battery is depleted. contents... -
Page 98: Date/Time Display
system setting LCD Brightness You can adjust the brightness of the LCD screen to compensate for ambient lighting conditions. 1. Press the MENU button Control joystick (/) “Settings” Control joystick (//OK) “LCD Brightness.” 2. Move the Control joystick (//OK) to adjust the LCD brightness from -15 to 15. -
Page 99: Auto Lcd Off
LCD screen. • When this “Auto LCD Off” function is enabled, you can press any button on the camcorder to return LCD brightness to normal. • Auto LCD Off will be disabled in the following cases: - If the DC power cable (AC power adaptor, USB cable) is connected. -
Page 100: Transparency
When on, a beep will sound every time a button is pressed. The Beep Sound function is cancelled in the following cases: - During recording, playing - When the camcorder has a cable connection. (AV cable) contents 0:00:00 [475Min] STBY... -
Page 101: Shutter Sound
Auto Power Off You can set your camcorder to automatically turn off if it is idle for 5 minutes without an operation. This function will prevent unnecessary power consumption. 1. Press the MENU button Control joystick (/) “Settings” ... -
Page 102: Pc Software
If you set PC Software to On, you can simply use the PC software by connecting the USB cable between the camcorder and your PC. You can download the stored video and photo images on the camcorder to your PC’s hard disk. Editing video/photo fi les is also available using the PC software. -
Page 103: Tv Display
3. Set the date and time again. page 28 • Do not turn off the power while using this function. • After resetting the camcorder, set “Time Zone” and “Date/Time Set.” page 28 • Storage type is not restored after default setting. (SMX-F43/F44 only) page 80 Version The version information may be changed without notice for improvement. -
Page 104: Demo
Demo Demo mode automatically shows you the major functions that are included with your camcorder so that you may use them more easily. 1. Press the MENU button Control joystick (/) “Settings” Control joystick (//OK) “Demo.”... -
Page 105: Connecting To A Tv
1. Connect the provided Audio/Video cable to the Audio/Video jack on the TV. 2. Turn on your TV and set the TV’s input selector to the Input your camcorder is connected to. • Refer to the TV’s instruction manual to see how to select the TV input. -
Page 106: Viewing On A Tv Screen
• If the “TV Display” is set “Off,” TV screen does not include the OSD (On Screen Display) menus. page 90 • This camcorder does not support the audio output signal when the camcorder is connected with TV in the video or photo record mode. The audio output signal is supported as long as the camcorder is connected in the video playback mode. -
Page 107: Dubbing Videos
DUBBING TO VCR OR DVD/HDD RECORDERS You can dub images played back on your camcorder to other recording devices, such as VCRs or DVD/HDD recorders. This is a convenient way of distributing the dubbed media. Connect the device as the following way. -
Page 108: Using With A Windows Computer
Windows computer CHECKING YOUR COMPUTER TYPE This chapter explains how to connect the camcorder to a computer using the USB cable. Check your computer type before using!!! To view your recordings on a computer, you need to check your computer type first. And then, take the steps below according to your computer type. -
Page 109: What You Can Do With A Windows Computer
You can enjoy the following operations by connecting your camcorder to your Windows computer by using a USB cable. Main Functions • By using the built-in editing software, ‘Intelli-studio’ on your camcorder, you can enjoy the following operations. - Playing back recorded videos or photos. page 100 - Editing recorded videos or photos. -
Page 110: Using The Intelli-Studio Program
CD-ROM drive that has the Intelli-studio program in My Computer and run iStudio.exe. • When a USB cable is connected, if you have EmoDio (Samsung's MP3 player software) installed on your computer, the EmoDio software may load fi rst. - Page 111 Displays videos and photos in various ways. • Thumbnail: Displays video and photo thumbnails Intelli-studio program is built in both Samsung camcorders and Samsung digital cameras. Some functions on the program may not work depending on the product. ❷ ❸...
- Page 112 using with a Windows computer Step 3. Playing back the videos (or photos) • You can play back the recordings conveniently using the Intelli-studio application. 1. Run the Intelli-studio program. page 98 2. Click the desired folder to display your recordings.
- Page 113 For more information about Intelli-Studio, see the Help Guide by clicking the menu item, "Help" -> "Help." Exporting the videos/photos to your computer You can export the recorded videos/photos from your camcorder to a PC. 1. Select the desired files to export.
-
Page 114: Using As A Removable Storage Device
• When the removable disk does not appear automatically, open the removable disk folder of My Computer. • If the connected camcorder’s disk drive does not open or the context menu that appears when right-clicking your mouse (open or browse) appears broken, your computer may be infected by an Autorun virus. -
Page 115: Image Format
• The name of a movie fi le recorded by the camcorder should not be modifi ed, since proper playback by the camcorder requires original folder and fi le naming convention. -
Page 116: Troubleshooting
TROUBLESHOOTING ✪ Before contacting a Samsung authorized service center, perform the following simple checks. They may save you the time and expense of an unnecessary call. Warning indicators and messages Power source Message Low Battery Check authenticity of the battery. - Page 117 Message Icon Informs that... formatted. Format The format of the file is not the Card? supported by this camcorder. (Format the Internal Memory?) Low speed card. The memory card does Please not have enough speed to record record. a lower resolution.
-
Page 118: Symptoms And Solutions
Note before sending your camcorder for repair. • If these instructions do not solve your problem, contact your nearest Samsung authorized service center. Depending on the problem, the camcorder's built-in memory (SMX-F43/F44 only) may need to be •... - Page 119 Unknown image The camcorder is in Demo mode. If you do not want to see Demo • appears on the images, change the setting of “Demo” to “Off.” page 92 LCD screen.
- Page 120 (SDHC memory card, etc.), if any. Copy all important recorded files to your PC before formatting. Samsung shall not be responsible for any loss of data. (It is recommended that you copy the data to your PC or other storage media.)
- Page 121 Your camcorder is damp and moist inside (condensation). • Turn off your camcorder and leave it for about 1 hour in a cool place. The estimated recording time may vary depending on contents and • The actual features used.
- Page 122 Your camcorder is damp and moist inside (condensation). Turn off your camcorder and leave it for about 1 hour in a cool place. Set your camcorder to Record mode.
-
Page 123: Adjusting The Image During Recording
If the temperature inside the camcorder is too high, it cannot function • function does not properly. work properly. Turn the camcorder off, wait for a few moments, and turn it on again. Playback is interrupted Check if the AC adaptor or battery pack is properly connected and stable. •... -
Page 124: Connecting To A Computer
Disconnect the USB cable from the computer and camcorder, restart the computer, then reconnect it correctly. A video codec is needed to play the file recorded on your camcorder. Install or run the built-in edit software (Intelli-studio). Make sure you insert the connector in the correct direction, and connect the USB cable to the USB jack on your camcorder firmly. - Page 125 General operations Symptom The date and time Has the camcorder been left unused for a long period of time? • are incorrect. The backup built-in rechargeable battery may be discharged. page 28 Pressing a button will not turn on Remove the battery pack or unplug the AC power adaptor, and reconnect •...
-
Page 126: Maintenance & Additional Information
• Do not leave the camcorder in a place where the temperature is very high for a long period of time: The temperature inside a closed vehicle or trunk can become very high in a hot weather. If you leave the camcorder in such a place, it could malfunction or the case could be damaged. -
Page 127: Additional Information
- Do not store the storage media in locations with high temperature or high humidity. - Do not touch the metal parts. • Copy the recorded files to your PC. Samsung shall not be responsible for any lost data. (It is recommended that you copy the data from your PC to other media for storage.) -
Page 128: Using Your Camcorder Abroad
The provided AC adaptor features automatic voltage selection in the AC range from 100 V to 240 V. You can use your camcorder in any countries/regions using the AC power adaptor supplied with your camcorder within the AC 100 V to 240 V, 50/60 Hz range. -
Page 129: Specifications
Model name SMX-F40BN/SMX-F40SN/SMX-F40RN/SMX-F40LN SMX-F400BN/SMX-F400SN/SMX-F400RN/SMX-F400LN SMX-F43BN/SMX-F43SN/SMX-F43RN/SMX-F43LN SMX-F44BN/SMX-F44SN/SMX-F44RN/SMX-F44LN Video signal Picture compression format Audio compression format Recording resolution System Image device Lens Focal length Filter diameter Size/dot number LCD screen LCD screen method Composite video out Connectors Audio output USB output... -
Page 130: Limited Warranty
SAMSUNG LIMITED WARRANTY SAMSUNG Electronics America Inc. (SEA), warrants that this product is free from defective material and workmanship. SEA further warrants that if product fails to operate properly within the specified warranty period and the failure is due to improper workmanship or defective material, SEA will repair or replace the product at it’s option. All warranty repairs must be performed by a SEA authorized service center. The name and address of the location nearest you can be obtained by calling toll free: 1-800 SAMSUNG (1-800-726-7864). Labor 90 days carry-in Parts 1 year On carry-in models, transportation to and from the service center is the customer’s responsibility. The original dated sales receipt must be retained by the customer and is the only acceptable proof of purchase. It must be presented to the authorized service center. EXCLUSIONS (WHAT IS NOT COVERED) This warranty does not cover damage due to accident, fire, flood and/or other acts of God; misuse, incorrect line voltage, improper installation, improper or unauthorized repairs, commercial use, or damage that occurs in shipping. Exterior and interior finish, lamps, and glass are not covered under this warranty. Customer adjustments which are explained in the instruction manual are not covered under the terms of this warranty. This warranty will automatically be voided for any unit found with a missing or altered serial number. This warranty is valid only on products purchased in the United States and Puerto Rico. Some States do not allow the exclusions or limitations of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State. - Page 131 If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center Samsung Electronics America, inc. 1-800-SAMSUNG (726-7864) www.samsung.com/us RoHS compliant Our product complies with “The Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment”, and we do not use the...