Table of Contents
Advertisement
Recording
Symptom
When the screen is exposed to direct sunlight during
recording, the screen turns red or black for an
instant.
During recording, the date/time does not appear.
The beep sound is not heard.
There is a time difference between the point where
you press the [Recording start/stop] button and
the point where the recorded video starts/stops.
You cannot record a photo image.
•
Do not expose the LCD screen to direct sunlight.
•
Set Date/Time Display to on.
•
Set the Beep Sound to On.
•
The beep sound is temporally off while the camcorder records videos.
•
When the Audio/Video cable jack is connected to the camcorder, the beep sound will automatically turn
off.
•
On your camcorder, there may be a slight time delay between the point where you press [Recording
start/stop] button and the actual point where the recorded video starts/stops. This is not an error.
•
Set your camcorder to the recording mode.
•
Release the lock on the write-protection tab of the memory card if set.
•
The storage media is full.
Use a new memory card or format the storage media.
Remove unnecessary images.
Explanation/Solution
page 72
page 26
page 76
page 68
Troubleshooting
page 31
93
Advertisement
Table of Contents
