Cable Diagrams - Hitachi X200 Series Connection Manual

5

Cable Diagrams

The following cable diagrams may be different from cable diagrams recommended by Hitachi IES Co., Ltd.
Please be assured there is no operational problem in applying the cable diagrams shown in this manual.
• The FG pin of the External Device body must be D-class grounded. Refer to your External Device manual for
more details.
• The SG and FG are connected inside the Display. When connecting the External Device to the SG, design
your system to avoid short-circuit loops.
• Connect an isolation unit if the communication is not stable due to noise or other factors.
Cable Diagram 1
Display
(Connection Port)
*1
GP3000 (COM1)
AGP-3302B (COM2)
*2
ST (COM2)
LT (COM1)
*3
GP3000 (COM2)
*4
IPC
GP-4106 (COM1)
GP-4107 (COM1)
*1 All GP3000 models except AGP-3302B
*2 All ST models except AST-3211A and AST-3302B
*3 All GP3000 models except GP-3200 series and AGP-3302B
GP-Pro EX Device/PLC Connection Manual
COM port conversion adapter by Pro-face
CA3-ADPCOM-01
1A Terminal block conversion adapter by Pro-face
CA3-ADPTRM-01
User-created cable
1B User-created cable
Online adapter by Pro-face
CA4-ADPONL-01
1C Terminal block conversion adapter by Pro-face
CA3-ADPTRM-01
User-created cable
Online adapter by Pro-face
CA4-ADPONL-01
1D
User-created cable
COM port conversion adapter by Pro-face
CA3-ADPCOM-01
1E Terminal block conversion adapter by Pro-face
CA3-ADPTRM-01
User-created cable
1F User-created cable
1G User-created cable
1H User-created cable
Cable
+
+
+
+
+
+
+
23
Inverter MODBUS RTU Driver
Notes
Cable length: 250m or
less