Samsung SCX-5315F User Manual page 62

Option
RX REDUCTION
DISCARD SIZE
REDIAL INTERVAL
REDIALS
ANSWER ON RINGS
SEND FROM MEMORY
LOCAL ID
CLOCK MODE
When receiving a document as long as or longer than the
paper installed in your machine, the machine can reduce
the size of the document to fit the size of paper loaded in
the machine. Select ON if you want to automatically
reduce an incoming page. You can set the Horizontal
Reduction. With Horizontal Reduction enabled, the
machine reduces an incoming document along the vertical
axis only.
With this feature set to OFF, the machine cannot reduce
the document to fit onto one page, the document is
divided and printed in actual size on two or more pages.
When receiving a document as long as or longer than the
paper installed in your machine, you can set the machine
to discard any excess at the bottom of the page. If the
received page is outside the margin you set, it will print on
two sheets of paper at the actual size.
If the document is within the margin, and the RX
Reduction feature is turned ON, it will be reduced to fit
into the appropriate size paper (Discard does not occur).
If the Auto Reduction feature is turned OFF or fails, the
data within the margin will be discarded. Settings range
from 0 to 30 mm.
Your machine can automatically redial a remote fax
machine if it was busy. Intervals from 1 to 15 minutes can
be entered.
Specifies the number of redial attempts (0 to 13). If you
enter 0, the machine will not redial.
Specifies the number of times the machine rings (1 to 7)
before answering an incoming call.
When enabled, all fax transmission documents are
automatically scanned into the memory. It will not be
necessary to wait until documents in the Automatic
Document Feeder are sent before you can send or store
other fax jobs.
When enabled, the machine automatically prints the page
number, date and time of reception at the bottom of each
page of a received document.
You can configure the machine to display time using either
a 12-hour or 24-hour format.
Description
A
DDITIONAL
6
F 6.7
EATURES