Sending A Fax Manually - Samsung SCX-5315F User Manual

6
If the SEND FROM MEMORY feature is set to ON (default
setting), the document is scanned into the memory and the
display shows the remaining memory capacity and the
number of pages being stored in memory.
If the document is fed from the document glass, the display
shows "ANOTHER PAGE?" on the top line after the document
is scanned into the memory. If you have the next page,
remove the scanned page and load the next page on the
glass and select "1.YES". Repeat as necessary.
When all pages are scanned, select "2.NO" when the display
shows "ANOTHER PAGE?."
7
The number is dialled then begins transmission when the
remote fax machine is ready.
N : If you want to cancel the fax, press Stop/Clear at any
OTE
time during the transmission.

Sending a Fax Manually

Manual sending allows you to talk to the other party before
sending the document. This method is useful if the other party
must manually set their fax machine to receive before they can
receive a fax. For this mode, you need to have a telephone
connected to the EXT jack on the machine.
1
Feed the document(s) face up into the ADF.
Or
Place a single document on the document glass face down
2
Adjust the document settings if necessary. For details, see
"Adjusting Document Settings" on page 2.4.
3
Make a call to the remote fax machine from the extension
telephone connected to your machine.
4
When you hear the other party answers the call, start
talking.
When you hear the high-pitched fax signal of the other
party's fax machine, press Copy/Start.
5
Replace the extension telephone.
S F 2.7
ENDING A AX
2