Adjusting Document Settings - Samsung SCX-5315F User Manual

2.4
S F
ENDING A AX
N :
OTES
• If you are scanning a page from a book or magazine, close the
document cover flat. The slanted cover may cause heavy
exposure of the light when scanning.
• Make sure that no document is in the ADF. If any document is
detected in the ADF, the document has the priority over a
document on the glass plate.
3
Make sure that the machine is in the Fax mode. If
necessary, press Mode/Enter to change the mode into the
Fax mode. In the Fax mode, the display shows:
4
You can adjust the following document settings to suit your
fax needs (see page 2.4):
•Resolution – to select resolution.
•Contrast – to adjust contrast.
5
Use the number keypad to dial the number of the remote
fax machine.
6
Press Copy/Start or Mode/Enter.
The document scans into the memory. The display asks if
you want to send another page. Change the page and press
"1.YES" else select "2.NO". If "1.YES" is selected, the next
page is scanned. Repeat this until all pages are scanned
then select "2.NO" when the pages will be sent
immediately.

Adjusting Document Settings

When setting typical text based documents, the default
document settings produce good results.
However, if you send documents that are of poor quality, or
contain photographs, you can adjust the following features to
ensure a higher quality.