•
If you connect properly your monitor using the DVI connector but get a blank or fuzzy
screen, check to see if the monitor status is set to analogue. Press 'SOURCE [
to have the monitor double-check the input signal source.
Connecting an Antenna
Note
You may view television programs on the monitor if it is connected to an antenna or CATV
cable without installing any separate TV reception hardware or software on your computer.
1.
Connect the CATV cable or TV antenna cable to the "ANT IN" port on the rear side of
the monitor.
Make sure to use a TV antenna cable (sold separately) as the antenna cable.
2.
Turn on the monitor.
Note
Is weak signal causing poor reception?
Purchase and install a signal amplifier for better reception.
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1. Press the POWER button on the remote control.
Note
You can also use the POWER button on the TV.
2.The message
Connections
You can set the menu Language. is displayed.
]' button