Connections; Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung TA950 User Manual

Connections

Connections
When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and antenna.
DC 14V
Power Input
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWErP button. Plug & Play is available only when the Input Source is set to TV.
✎
Before turning on the TV, make sure the antenna cable is connected.
1
Wired/Wireless network
connection
2
Setting up the Network
3
Selecting the usage mode
4
Select Country
5
Setting the Clock Mode
6
Selecting search options for auto
tuning
7
Enjoy your TV.
If You Want to reset This Feature...
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0". If you want to
change the PIN number, use the Change PIN function.
You should do Plug & Play
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets
the PIN to "0-0-0-0":
Downloaded from ManualMonitor.com Manuals

Connecting to an Antenna

ANT IN
Plug & Play (Initial Setup)
Set up your network connection. Press the ENTErE button to start.
Set up your network connection. Press the ENTErE button to start. If you do not
know your network set up information or want to set to it later, select Skip. You can
set up the network connection later using the Network menu.
Press the ◄ or ► button, then press the ENTErE button.
Select the Home use mode. Store Demo mode is for retail environments. To
return the unit's settings from Store Demo to Home use (standard): Press the
volume button on the TV. When you see the volume OSD, press and hold
for 5 sec.
y Store Demo is only for shop display. If you select it, several functions are not
able to use. Please select Home use when you watch at home.
Press the ▲ or ▼ button, then press the ENTErE button.
Select the appropriate country.
Set the Clock Mode automatically or manually.
y auto: Allows you to select a time zone.
✎
Press the ▲ or ▼ button to highlight the time zone for your local area.
Press the ENTErE button. (Australia only)
y Manual: Allows you to manually set the current date and time.
Select the channel source to memorise among Digital & analogue / Digital /
analogue.
✎
Press the ENTErE button at any time to interrupt the memorisation
process.
If you want to watch a broadcast programme, select Close. If you want to enjoy
the Smart Hub, select the Smart Hub.
(MENu → System) again at home although you did in shop.
POWEr (off) → MuTE → 8 → 2 → 4 → POWEr (on).
Cable
ANT OUT
MENu
14
English