Connections; Connecting To An Antenna; Setup (Initial Setup) - Samsung SyncMaster 3 Series User Manual

Connections

Connections
When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWErP button.
✎
Setup is available only when the Input Source is set to TV.
1
Selecting a language
2
Selecting Store Demo
or Home use
3
Auto Program
4
Setup Clock
5
Complete
If You Want to reset This Feature...
MENum → System → Setup → ENTErE
You should do Setup again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to "0-0-
(off) →
0-0": POWEr MuTE

Connecting to an Antenna

Setup (Initial Setup)

Press the ▲ or ▼ button, then press the ENTErE button. Select the
desired OSD (On Screen Display) language.
Press the ▲ or ▼ button, then press the ENTErE button.
y Select the Home use mode. Store Demo mode is for retail
environments.
y To return the unit's settings from Store Demo to Home use (standard):
Press the volume button on the TV. When you see the volume OSD,
press and hold for 5 sec.
MENu
y Store Demo is only for shop display. If you select it, several functions
are not able to use. Please select Home use when you watch at
home.
Find and store channels on your TV.
Firstly, please select how you receive your programming
y I use an aerial cable to connect to TV. Memorise all of the available channels using RF cable.
y I use a set-top box. TV and set-top box are not connected by an aerial cable. So the customer does
not need to do the auto tuning steps.
✎
You can complete Setup by selecting it.
To run auto program, please select Next button. Then set the search options for anto tuning.
y If the antenna is connected to
select Cable. After selecting the antenna source to memorize, select Next. The TV will begin
memorizing all of the available channels.
Set the Clock Mode automatically or manually.
y auto: Allows you to select time zone.
y Manual: Allows you to manually set the current date and time.
y Select time zone you are in by pressing the u or d button.
Press the ENTErE button to confirm your choice.
✎
If the customer choose "Manual" set clock, this step doesn't display.
Press the ENTErE button.
→ 8 → 2 → 4 →
POWEr (on).
VHF/UHF Antenna
or
Antenna Cable
(Not Supplied)
aNT 1 IN (aIr), select air and if it is connected to
Cable
ANT OUT
P
aNT 2 IN (CaBLE),
14
English
INFO