NICAM Stereo
Note
If the stereo signal is weak and an automatic switching occurs, then switch to the mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
This function is only available in TV mode.
Channel
Note
The default setting may be different depending on the selected Input Mode (input signal
source selected in External Input List) and the selected resolution.
Country
Select the country in which the product is being used before you use the Auto Store feature.
If you do not see your country in the list, select Others.
Analogue Channel
You can change the country for analogue channels.
Digital Channel
You can change the country for digital channels.
Note
The PIN number input screen appears. Enter your 4 digit PIN number.
Adjusting the LCD Display
Audio Type
Stereo
STEREO
Dual
DUAL 1
Mono
Stereo
MONO
Dual
MONO
Dual 1 / 2
MONO Automatic change
DUAL 2
MONO
Automatic change
STEREO Automatic change
DUAL 1
DUAL 2
Dual 1 / 2
DUAL 1
DUAL 1