Table of Contents
Advertisement
Connections
When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
VHF/UHF Antenna
CABLE
ANT OUT
When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic
settings. To turn on the TV, press the POWERP button.
✎
Plug & Play is available only when the Source is set to TV.
✎
To return to the previous step in the Plug & Play sequence, select Previous, and then press ENTERE.
✎
Before turning on the TV, make you have connected the TV to an antenna or cable connection.
1
Selecting the OSD
Language
2
Setting up the Network
3
Selecting the usage
mode
4
Setting the Clock
Mode
14
English
Connecting to an Antenna
or
Plug & Play (Initial Setup)
Press the ▲ or ▼ button to select a language. Press ENTERE twice when done.
Set up your network connection. Press the ENTERE button to start. If you do not know
your network set up information or want to set to it later, select Skip. We suggest you skip
network connection setup now and refer to Network Settings section of this manual for set
up requirements and instructions(p. 32) . You can set up the network connection later using
the Network menu.
✎
When network connection settings are complete, Software Upgrade is available.
Select Next to upgrade TV software. Your TV will automatically upgrade, if your TV
need a software upgrade. If you want to upgrade later, select the Skip. For more
information, refer to "Software Upgrade"(p.40).
Press the ▲ or ▼ button to select Home Use, and then press the ENTERE button twice.
y Select the Home Use mode. Store Demo mode is for retail environments.
Press the ▲ or ▼ button to select Auto or Manual, and then press ENTERE twice.
✎
If you selected Auto, you'll go to the Time Zone screen. On the Time Zone screen, use
the ▲ or ▼ button to select your zone, and then press ENTERE. When done, press
ENTERE.
✎
If you selected Manual, you'll go to the Date and Time screen. Select Date or Time,
and then press ENTERE. Then, use the number buttons or the ▲ or ▼ button to
set the date or time. Use the ◄ or ► button to move between entry fields. When
done setting the Date and Time, select Next, and then press ENTERE.
ANT 1 IN
ANT 2 IN
(AIR)
(CABLE)
POWER
P
INFO
Advertisement
Table of Contents
