Scan Setting - Grundig DKR 3000 User Manual

FM­RADIO
Using­FM­mode­for­the­first­time
1
To select FM mode, Open the <
> by long pressing the »INFO/MENU« but-
ton, select < FM > by short pressing th » « /
» « button, and the short press the »OK« / »
« knob to confirm.
2 Or, in current "now playing" screen, open the
mode menu and select "FM­Radio" icon by
short pressing the »
then short press the » « / » « and » « / »
« button or rotating the »OK« knob, and then
short press the »OK« / »
3
When FM radio is used for the first time, the
Automatic Memory Station (AMS) scan func-
tion starts and searches the FM waveband and
stores the first 30 radio stations as presets 1 to
30 (if available).
Frequency­search­starts­from­
- Display: <
87.50­and­stops­at­108.0MHz
4 After the scanning process is completed, the
device starts to play the first received FM sta-
tion.
Note: If FM radio function has been used before,
then the last listened station will be selected.
5 Rotate the »OK« knob to » -­« / » +­« on device
or short press the »VOL­-­« / »VOL+« button
repeatedly on remote control to set the desired
volume level when necessary.
Scan­Setting
You can select whether the device will scan
radio stations with Strong Station Only or All Sta-
tions from the menu of FM mode. To do this;
1
In FM screen, long press the
MENU«button on device or short press the
»MENU« button on remote control to open the
FM mode menu.
FM­Menu
- Display: <
2 Select (Scan Setting) by short pressing the »
« / » « button or rotating the »OK« knob, and
then short press the »OK« button to confirm.
- Display: < Strong­Stations­Only?
YES­­NO
< > appear.
­------------------------------------------------------------------------------------------------------------------------------------
Main­Menu
/­ MODE« button and
« knob to confirm.
>.
»INFO/
> briefly.
> and
3
Select the desired option (e.g. Strong Station
Only) by short pressing the » « / » « but-
ton or rotating the »OK« knob, and then short
press the »OK« / »
4 To close the menu, short press the
MENU« button on device or short press the
»MENU« button on remote control.
5 And now, long press the »OK« knob to start the
Auto Memory Station (AMS) function again to
scan the FM waveband and store the first 30
radio stations with a strong signal as presets 1
to 30 (if available).
Tuning­a­station­manually
1 Long press the » « / » « button on device or
remote control to search the available previ-
ous/next FM radio station.
- The automatic station search starts and stops
at the next/previous FM station with a strong
signal.
or
2 Press briefly the » « / » « button on device
or remote control until you have found the fre-
quency you want. (The frequency changes in
steps of 0.05MHz)
Audio­Setting
By default, all stereo stations are reproduced in
stereo. For weak stations, this may result in a poor
signal-to-noise ratio (hiss).
1 To play weak stations in mono;
2 In FM screen, long press the
MENU«button on device or short press the
»MENU« button on remote control to open the
FM mode menu.
FM­Menu
- Display: <
3
Select < Audio Setting > by short pressing the
» « / » « button or rotating the »OK« knob,
and then short press the »OK« button to con-
firm.
- Display: < Listen­in­Mono­only?
YES­­NO
< > appear.
4 Select < YES > by short pressing the » « /
» « button or rotating the »OK« knob, and
« knob to confirm.
»INFO/
»INFO/
> briefly.
> and
ENGLISH
­ 6 1 ­