Selecting­another­track; Pausing­and­resuming­playback; Repeat­actual­track - Grundig MS240 User Manual

CD­MODE
Selecting­the­CD­input­source
1
Press »SOURCE« on the hi-fi system repeat-
edly or press »CD« on the remote control.
Inserting­and­playing­CDs
Warning
The lens of the CD player should never be
7
touched.
1
Press »PUSH­ « on the hi-fi system to open
the CD compartment.
2
Insert your CD in the compartment with its la-
bel facing upwards.
3 Close the lid of the CD compartment by press-
ing »PUSH­ « on the hi-fi system.
4
Press » « to start playback.
Notes:
To change an album in MP3/WMA mode,
7
press » « or » « on the remote control.
To select additional title information, press
7
»DISPLAY«.
5
Press » / « to stop playback.
7
Notes:
CD playback also stops when:
the CD compartment is opened;
7
the disc has reached the end;
7
you select another source: TUNER, CASS,
7
CARD, USB or AUX;
you select standby;
7
you press the tape deck »
7
Pausing­and­resuming­playback
1 Press » « during playback to pause.
– In the display, the elapsed playing time
flashes.
2
Continue playback by pressing »
Repeat­actual­track
1
During playback, press »
tem or press » « or »
5
– Playback starts from the beginning.
­---------------------------------------------------------------------------------------------------------------------------------------
« button.
8
«.
« on the hi-fi sys-
3
« on the remote control.
6
Selecting­another­track
1
During playback, press »
the hi-fi system or »
control once or repeatedly until the number of
the desired track appears in the display.
– Playback of the selected track starts auto-
matically.
Note:
You can also select tracks in stop mode.
7
However, you must then start playback of
the track with » «.
Searching­for­a­passage­within­
a­track
1 During playback, press and hold down »
or » «.
4
– Playback is at high speed and without vol-
ume.
2
Release » « or »
3
has been found.
– Playback continues.
« or »
3 4
« or » « on the remote
5 6
3
« when the passage
4
ENGLISH
« on
«
23­