General Functions; Automatic Shutdown; Tuner Mode - Grundig MS240 User Manual

GENERAL­FUNCTIONS
Switching­on­and­off
The only way to disconnect the hi-fi system from
the mains supply is to pull out the plug from the
wall socket.
1 Switch on the hi-fi system from standby mode
by pressing » 8 « or »SOURCE« on the hi-fi sys-
tem.
– The system switches to the last selected
source.
Note
If you use the remote control, you can press
7
» 8 « or one of the buttons »CD«, »USB«,
»SD«, »TUNER«, »CASS« or »AUX«.
2 Switch the hi-fi system to standby mode by
pressing » 8 «.
Automatic­shutdown
If the device is in the "Stop" position or on socket
»AUX­In« is no audio signal available, the de-
vice switches automatically to Stand-by mode
after 15 minutes. For further using switch on the
device again.
Adjusting­the­volume
1 Adjust the volume with »+­VOLUME­-« on
the hi-fi system; or »+« and »–« on the remote
control.
TUNER­MODE­
Selecting­the­tuner­input­source
1 Select the TUNER input source with
»SOURCE« on the hi-fi system or »TUNER«
on the remote control.
– The most recently selected station is played
(Last Station Memory).
Selecting­presets
1 Press »+­ PRESET­
press » « or » « on the remote control.
22­
ENGLISH
­ - ---------------------------------------------------------------------------------------------------------------------
–« on the hi-fi system or
­---------------------------------------------------------------------------------------
Selecting­sound­settings
You can choose between the preset sound set-
tings FLAT, CLASSIC, ROCK, POP and JAZZ.
1 Select the sound setting using »EQ« on the re-
mote control.
Switching­the­Ultra­Bass­System­
on­and­off
1 Switch the Ultra Bass System on and off by
pressing »UBS« on the remote control or hi-fi
system.
Muting
You can switch the hi-fi speakers to and from
mute mode with this function.
1
Activate mute with » « on the remote control.
2 Deactivate mute with » « on the remote con-
trol.
Displaying­the­time­
1
Display the time by pressing »DISPLAY«.
2
Press »DISPLAY« again to switch off the time.
Stereo/mono­reception
If the hi-fi system is receiving a stereo broadcast,
» « appears in the display. If the signal from
!
the stereo channel is weak, you can improve the
sound quality by switching to mono reception.
1 Press » / « to switch to mono reception.
7 !
2 To switch back to stereo, press »
again.
/ «
7 !