Install The Batteries - Kohler K-4000 Installation And Care Manual

Touchless flush
Hide thumbs Also See for K-4000:
Table of Contents

Advertisement

Available languages

Available languages

Battery Holder
Press.

3. Install the Batteries

CAUTION: Risk of property damage: Do not use lithium
ion batteries with this product. Exposing lithium ion batteries
to water can result in a fire.
NOTE: When the batteries are low, the unit will beep five times at
half second intervals. Replace the batteries when this happens.
Install the batteries in the battery holder. Orient them as shown in
the battery holder diagram.
Open the module lid.
Install the battery holder with the open side facing the back of
the module and press down until it stops.
Confirm the top edge of the battery holder is below the rim of the
module.
Close the module lid and press on the front ledge until the clasp
engages.
Kohler Co.
Rim
5
Position
as shown.
1224637-2-E

Advertisement

Table of Contents
loading

This manual is also suitable for:

K-6418K-6419K-18202K-99249K-99250

Table of Contents