Table of Contents
Advertisement
3.4.4.4
Devices with S0 interface or digital output
The devices have two mutually independent digital outputs.
You can use the digital output either as an S0 pulse output or as a limit threshold violation.
You can connect the device in PNP or NPN mode. You can find more information in chapters
Technical data (Page 99), Dimensional drawings (Page 105) and Connecting three-phase
device (Page 75).
Activation of the digital outputs is indicated on the display by the symbols
If the output is programmed as an S0 interface, you can connect the energy meter to the
following devices:
• Electromechanical meter
• PLC
If you choose the limit threshold violation setting, you can use the output for:
• Isolating unimportant loads
• Alarm signaling
Note
The status of the digital output is not updated during parameterization (setup).
7KT16 energy meter
Equipment Manual, 09/2020, 2514284147-04
Description
3.4 Three-phase devices 80 A
and
.
37
Hide quick links:
Advertisement
Table of Contents
