Zanussi ZWGB 7140 AS User Manual page 8

• Plug the smaller upper hole and the two
large ones with the corresponding plastic
plug caps.
8
Warning! Do
not remove the
drain hose from
the rear support.
Remove this hose
only if it is neces-
sary to drain the
water. Refer to
"Frost precaution"
and "What to do if".
Positioning and levelling
Level the appliance by raising or lowering the
feet.
The appliance MUST be level and stable on a
flat hard floor. If necessary, check the setting
with a spirit level. Any necessary adjustment
can be made with a spanner.
Accurate levelling prevents vibration, noise
and displacement of the appliance during op-
eration.
Repeat the levelling action, if the appliance is
not level and stable.
Warning! This appliance is free standing
only. Do not remove the worktop for any
reason.
Water inlet
Caution! This appliance must be
connected to a cold water supply
x 4
www.zanussi.com