Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Zanussi ZWG 580 P
Summary of Contents for Zanussi ZWG 580 P
- Page 1 User manual Washing Machine ZWG 580 P ZWG 5100 P ZWG 5120 P...
-
Page 2: Table Of Contents
• This appliance is heavy. Care should be tak- • It is dangerous to alter the specifications or en when moving it. attempt to modify this product in any way. • All packing and transit bolts must be re- moved before use. Serious damage can oc- www.zanussi.com... - Page 3 • This appliance is designed for domestic use. polystyrene) can be dangerous to children - danger of suffocation! Keep them out of chil- It must not be used for purposes other than those for which it was designed. dren’s reach. www.zanussi.com...
-
Page 4: Frost Precaution
For more detailed point for the recycling of electrical and information about recycling of this product, electronic equipment. By ensuring this product please contact your local council, your www.zanussi.com... -
Page 5: Product Description
Product description Detergent dispenser drawer Water drain hose Worktop Drain hose support Control panel Hose holders Door opening handle Water inlet hose Rating plate (on the inner edge) Mains cable Front adjustable feet Back feet www.zanussi.com... -
Page 6: Technical Data
ZWG 580 P and ZWG 5100 P = 2 front ad- ZWG 5120 P = 4 adjustable feet justable feet Technical data Dimensions Width 60 cm Height 85 cm Depth 50 cm Depth (Overall dimensions) 54 cm Electrical connection Information on the electrical connection is given on the rating plate, on Voltage - Overall power - Fuse the inner edge of the appliance door. -
Page 7: Frost Precaution
"Frost precaution" instruction booklet and "What to do if". and the plastic plug caps from the drum. • Remove the power supply cable and the draining and inlet hose from the hose hold- ers on the rear of the appliance. www.zanussi.com... - Page 8 Repeat the levelling action, if the appliance is Positioning and levelling not level and stable. Water inlet Connect the hose to a tap with a 3/4” thread. 35° 45° www.zanussi.com...
- Page 9 Tie the plastic hose guide to the tap with a mum of 4 metres. An additional drain hose string to prevent that the drain hose unhooks and joining piece is available from your Local when the appliance is emptying. Centre. • Onto a sink outlet spigot. www.zanussi.com...
-
Page 10: First Use
• Before the first wash, run a cotton cycle at the highest temperature without any Daily use Sort out the laundry structions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. Follow the wash code symbols on each gar- ment label and the manufacturer’s washing in- www.zanussi.com... - Page 11 Mould stains: treat with bleach, rinse well (whites and fast coloureds only). Grass: soap lightly and treat with bleach (whites and fast coloureds only). 1) do not use acetone on artificial silk. www.zanussi.com...
- Page 12 If the flap is not in the desired position: • large amounts of foam form during washing. Degrees of water hardness Water hardness is classified in so-called “de- grees” of hardness. Information on hardness of the water in your area can be obtained from the www.zanussi.com...
- Page 13 Any additives must detergent: be placed in the ap- • Rotate the flap propriate compart- downwards. ments of the dispens- • Carefully put the er drawer just before drawer back. starting the wash pro- gramme. Close the detergent dispenser drawer www.zanussi.com...
- Page 14 Start the new programme by pressing the button 6 again. The water in the tub will be not emptied out. Temperature selector dial 20° Turn clockwise this dial to select the most suitable tempera- ture for washing your laundry . 30° : Cold wash. 95° 40° 60° www.zanussi.com...
- Page 15 By pressing this button the corresponding pilot light illuminates. Short cycle for lightly soiled items or for laundry which needs only freshening up. With this option, a reduced load of laundry is recommended: • Cottons 3 Kg • Synthetics and delicates 1,5 Kg www.zanussi.com...
- Page 16 6 and the pilot light corre- must be emptied out before opening the door. sponding to the just finished washing phase go Follow the below instructions to empty out the off. The light 7.3 illuminates. water: www.zanussi.com...
-
Page 17: Washing Programmes
Prewash - Main wash - Rinses - Maximum spin speed at 800 QUICK , EXTRA RINSE rpm for ZWG 580 P (1000 rpm for ZWG 5100 P, 1200 rpm for ZWG 5120 P) Max. load 6 kg - Reduced load 3 kg White, coloured cotton and linen. - Page 18 60° - 40° START, EXTRA RINSE Main wash - Rinses - Maximum spin speed at 800 rpm for ZWG 580 P (1000 rpm for ZWG 5100 P, 1200 rpm for ZWG 5120 P) Max. load 6 kg White and coloured cotton. This programme can be selec- ted for slightly or normally soiled cotton items.
- Page 19 START, EXTRA RINSE Main wash - Rinses - Maximum spin speed at 800 rpm for ZWG 580 P ( 900 rpm for ZWG 5120 P and ZWG 5100 P) In order to obtain the best anti-creasing result, reduce the load of synthetic items. (Recommended load 1 kg) Synthetic or mixed fabrics.
-
Page 20: Consumption Values
(Cold) START Main wash - Rinses - Maximum spin speed at 800 rpm for ZWG 580 P (1000 rpm for ZWG 5100 P, 1200 rpm for ZWG 5120 P) Max. load 3 kg Trousers, shirts or jackets in denim and jersey realized with hi- tech materials. -
Page 21: Care And Cleaning
• Select the hottest cotton wash programme. ment should be re- • Use a normal measure of detergent, must be moved. a powder with biological properties. Cleaning the dispenser drawer The washing powder and additive dispenser drawer should be cleaned regularly. www.zanussi.com... - Page 22 • turn programme selector dial to position • open the filter cov- • unplug the appliance; er and insert the fil- • open the door; ter again; • turn the drum and align the filter cov- er (FILTER) with the arrow on the door seal; www.zanussi.com...
-
Page 23: What To Do If
Before contacting your local Service Centre, gineer. please carry out the checks listed below. Fault code and mal- Possible cause / Solution function www.zanussi.com... - Page 24 • carry out the drain filter cleaning as described in "Cleaning the drain filter"; • at the end of cleaning action, close the door and insert the mains plug again; • run a drain programme to check if the appliance works now. www.zanussi.com...
- Page 25 • Check the water inlet hose connection. The drain or inlet hose is damaged. • Replace it with a new one. www.zanussi.com...
- Page 26 We recom- appliance and press the button 6 to restart the mend that you write the data here: programme. If the malfunction shows again, contact your Service Centre. The necessary data for the www.zanussi.com...
- Page 27 Model description (MOD.) ........Product number (PNC) ..........Serial number (S.N.) ..........Mod..Prod. No..Ser. No..www.zanussi.com...
- Page 28 www.zanussi.com/shop...