Zanussi ZWGB 7140 AS User Manual page 7

• Remove the cardboard top.
• Remove the polystyrene packaging materi-
als.
1
2
• Remove the polystyrene base from the bot-
tom.
www.zanussi.com
• Remove the exter-
nal film. Use a cut-
ter, if necessary.
• Spread the front
piece on the floor
behind the appli-
ance and then lay
the appliance care-
fully rear side down
on it. Make sure
that no hoses are
crushed in the
process.
• Return appliance to
it's upright position.
• Remove the power supply cable and the
draining hose from the hose holders (C) on
the rear of the appliance.
• Unscrew the three bolts (A) and remove the
hose holders (C).
• Slide out the relevant plastic spacers (B).
• Open the door and
remove the plastic
hose guide, the
bag containing the
instruction booklet,
the water inlet hose
and the plastic plug
caps from the
drum.
7