Iwatsu SS-623S Instruction Manual page 31

Battery runtime
Accessories
Environmental
characteristics
Operating temperature
and humidity range
Storage temperature and
humidity range
Operating altitude
Note 1) Equivalent nickel metal-hydride, nickel-cadmium battery, and other
rechargeable batteries can also be used.
Note 2) Operation time of this instrument during the use of batteries
The continuous operation time of this instrument is about 18 hours when
alkaline batteries are used. The LOW BATTERY LED lamp lights up when
batteries are consumed. About 30 minutes after the illumination, this
instrument will be automatically shut down to avoid over discharge. Note
that from the time the LOW BATTERY LED lamp comes on until the time this
instrument is automatically shut down may be shortened when nickel
metal-hydride batteries are used.
When using with the accessory batteries, the operation time of this
instrument may be shorter than that described above.
Approx. 18 hours (when alkaline batteries are
Note 2
used)
BNC cable (1), Adjustment Screwdriver (1), AA dry
battery (4),
Instruction Manual (1), and hard case (1)
0C to 40C, 80%RH or less
−10C to 60C, 80%RH or less
≤ 2,000 m at ≤ 25C
Chapter 5 Specifications
27