Recording Through A Dv Input Jack; Making A One Touch Recording (Otr) - Samsung DVD-VR350 Instruction Manual

DV
The DV device is connected.
MOVE OK RETURN
■ You can not change the recording mode and the programme
while recording.
■ Recording will stop automatically if there is no free space left for
recording.
■ Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc,
and up to 48 titles onto a DVD+RW/+R disc.
■ If the power interrupted due to power failure or other reasons, the
title being recorded will not be saved onto the disc.
■ Recording will stop automatically if a copy protected image is
selected.
■ Do not use DVD-R authoring discs with this unit.
■ Also refer to the user manual for your External Devices when
recording from external equipment using the Audio/Video cable
or scart cable.

Recording through a DV Input jack

You may control the Camcorder using the IEEE1394 (DV) interface.
Follow these directions to record onto a disc or tape from a
camcorder that has a DV output jack.
1. Connect the DV output jack of your camcorder to the DV input jack on
the front of your DVD Recorder & VCR using a DV cable.
2. Power on your DVD Recorder & VCR and switch to DV mode by
pressing the INPUT SEL. button on the remote control.
3. Press the REC SPEED button repeatedly to select the recording speed
(quality).
→ SP → LP → EP → XP
4. If the input is set to DV, a playback/record menu that enables
camcorder control appears on the top of the screen.
5. Select the Play icon on the upper part of the screen to playback the
camcorder and fi nd the starting position to copy.
6. To start recording, Press the ◄► buttons to select REC ( ) icon in the
top side of the screen, then press the OK button.
You can press the REC button on the remote control to start recording.
7. Press the STOP button on your DVD Recorder & VCR when the
recording is fi nished.
■ Some camcorders may not work with your DVD Recorder & VCR
even if they have a DV output jack.
■ Also refer to the user manual for your camcorder when recording
through a DV jack.
■ To display playback related icons on the screen, press any
direction button on the remote control.

Making a One Touch Recording (OTR)

One-Touch Recording (OTR) allows you to add recording time in preset
minute increments up to 9 hours by pressing the REC button repeatedly.
1. Press the PROG/TRK (
station to record.
If you want to record through a connected external component, press
the INPUT SEL. button to select an appropriate external input (Tuner,
AV1, AV2, AV3 or DV input).
English - 54
/ ) buttons or number buttons to select the
DVD-VR355 only