Progressive Scan - Samsung DVD-VR350 Instruction Manual

DVD-Recorder Video
No Disc
Programme
TV Aspect : 16:9 Wide
3D Noise Reduction : Off
Setup
Video Output : Component
576P
HDMI/DVI Resolution :
DivX(R) Registration 720P
1080i
MOVE OK RETURN EXIT
Available video output jacks are as follow.
Available Video Output Jack
Setting mode
Output jack
Component Output
(Y, P , P
B
AV1 Scart
Composite
Composite Video out
S-Video out

Progressive scan

If the TV supports Progressive Scan, press the P.SCAN button on
the front of the DVD Recorder & VCR to enjoy.
Setting up the Progressive scan
1. In Stop mode, press the P.SCAN button on the front of the DVD
Recorder & VCR.
The message "Press [Yes] to confi rm Progressive scan mode.
Otherwise, press [No]." will appear.
2. Press the ◄► buttons to select Yes, and then press the OK button.
3. Set your TV to Progressive input (using the TV remote control.)
■ Progressive setting is only available when the DVD recorder is in
stop mode.
Canceling the Progressive scan
1. In Stop mode, press the P.SCAN button on the front of the DVD
Recorder & VCR.
The message "Press [Yes] to confi rm Interlace scan mode. Otherwise,
press [No]." will appear.
2. Press the ◄► buttons to select Yes, and then press the OK button.
3. Set your TV to Interlace input (using the TV remote control.)
▌ HDMI/DVI Resolution (DVD-VR355 only)
This setting is used when the unit is connected by HDMI or DVI with
Display devices (TV, projector, etc).
►
►
►
• 576P : 720 x 576
√
• 720P : 1280 x 720
• 1080i : 1920 x 1080
English - 28
Component mode
P.SCAN off mode (Interlace mode) P.SCAN on mode
O
)
R
R, G, B X
O
O
O
RGB Mode
O
X
(TV in progressive mode)
X O
O X
O O
O O