Connecting Hdmi/Dvi To A Tv (Dvd-Vr355 Only); Case 1 : Connecting To A Tv With Hdmi Jack; Case 2 : Connecting To A Tv With Dvi Jack - Samsung DVD-VR350 Instruction Manual

Connecting HDMI/DVI to a TV
(DVD-VR355 only)
If your TV has a HDMI/DVI input, connect the HDMI/
DVI cable to the TV. You will enjoy the best quality
images and sounds.
▌

Case 1 : Connecting to a TV with HDMI Jack

• Using the HDMI cable, connect the HDMI OUT jack on
the rear of the DVD Recorder & VCR to the HDMI IN
jack of your TV.
• Press the input selector on your TV remote control
until the HDMI signal from the DVD Recorder & VCR
appears on your TV screen.
HDMI cable
(not supplied)
▌

Case 2 : Connecting to a TV with DVI Jack

• Using the DVI Adapter Cable, connect the HDMI OUT
jack on the rear of the DVD Recorder & VCR to the DVI
IN jack of your TV.
• Using the audio cables, connect the AUDIO (red and
white) OUT jacks on the rear of the DVD Recorder &
VCR to the AUDIO (red and white) IN jacks of your TV.
Turn on the DVD Recorder & VCR and TV.
• Press the input selector on your TV remote control until
the DVI signal from the DVD Recorder & VCR appears
on your TV screen.
■ To watch through the HDMI output, set the
digital audio output to PCM. (See page 26)
■ Depending on the HDMI device (TV/HDMI Receiver)
you use, audio may not be supported. If TV does
not support Dolby digital/DTS, Audio output is not
available when you set Digital output as Bitstream
or select DTS On in Audio setup menu. In this case,
set the digital audio output to PCM or DTS off.
■ If you connect the HDMI cable between Samsung
TV, you can operate easily DVD Recorder
& VCR using the TV remote control. (This is
only available with Samsung TVs that support
Anynet+(HDMI-CEC).) (See pages 33~34)
■ Please check the
logo, then it supports Anynet+ function.)
logo (If your TV has an
English - 20
DVI adapter cable
(not supplied)
red
■ To change HDMI output resolution, see pages
28~29.
■ HDMI (High Defi nition Multimedia Interface)
HDMI is an interface to enable the digital
transmission of video and audio data with just a
single connector. Since HDMI is based on DVI,
it is completely compatible with DVI. The only
difference between HDMI and DVI is that HDMI
supports multi-channel audio.
Using HDMI, the DVD Recorder & VCR transmits
a digital video and audio signal and displays a
vivid picture on a TV having an HDMI input jack.
■ HDMI connection description
HDMI connector - Both uncompressed video data
and digital audio data (LPCM or Bit Stream data).
- Though the DVD Recorder & VCR uses a HDMI
cable, the DVD Recorder & VCR outputs only a
pure digital signal to the TV.
- If TV does not support HDCP (High-bandwidth
Digital Content Protection), snow noise appears
on the screen.
■ Why does Samsung use HDMI?
Analog TVs require an analog video/audio
signal. However, when playing a DVD, the data
transmitted to a TV is digital. Therefore either a
digital-to-analog converter (in the DVD Recorder
& VCR) or an analog-to-digital converter (in
the TV) is required. During this conversion, the
picture quality is degraded due to noise and
signal loss. HDMI technology is superior because
it requires no D/A conversion and is a pure digital
signal from the DVD Recorder & VCR to your TV.
■ What is the HDCP?
HDCP (High-bandwidth Digital Content
Protection) is a system for protecting DVD
content outputted via HDMI from being copied.
It provides a secure digital link between a video
source (PC, DVD, etc) and a display device (TV,
projector, etc). Content is encrypted at the source
device to prevent unauthorized copies from being
made.
white