Playing A Disc - Samsung DVD-VR350 Instruction Manual

▌ Discs that cannot be played
● DVD-Video with a region number other than "2" or "ALL"
● 3.9 GB DVD-R Disc for Authoring.
● A DVD±R/DVD-RW(V) disc which has been recorded and not fi nalised
in a different manufacturer's recorder.
● DVD-ROM/PD/MV-Disc, etc
● CVD/CD-ROM/CDV/CD-G/CD-I
■ This DVD Recorder & VCR can only operate with discs that are
compatible with DVD-RAM Standard Version 2.0.
■ Playback and/or recording may not work for some types of discs,
or when specifi c operations, such as angle change and aspect
ratio adjustment, are being performed. Information about the discs
is written in detail on the box. Please refer to this if necessary.
■ Do not allow the disc to become dirty or scratched, fi ngerprints,
dirt, dust, scratches or deposits of cigarette smoke on the
recording surface may make it impossible to use the disc for
recording.
■ DVD-RAM/±RW/±R discs may not be able to play on some DVD
players, depending on the player, disc and the condition of the
recording.
■ Discs with NTSC programmes recorded on them can be played
but cannot be recorded using this product.

Playing a Disc

1. Press the OPEN/CLOSE button.
2. Place a disc gently into the tray with the disc's label facing up.
3. Press OPEN/CLOSE button to close the disc tray.
• Your DVD Recorder & VCR closes the disc tray and plays the disc
automatically.
• The recorder does not play discs automatically after being powered
on initially.
• When the recorder is powered on and a disc is in the tray, the unit will
be activated and wait in stop status. Press the PLAY button to start
playback.
4. Press the STOP button to stop playback.
■ When you stop playing a disc, the DVD Recorder & VCR
remembers where you stopped, When you press the PLAY
button again, it will pick up where you left off. (unless the disc
is removed or the DVD Recorder & VCR is unplugged, or if you
press the STOP button twice.)
■ Do not move your DVD Recorder & VCR while playing, as this
may cause damage to the disc.
■ Make sure to press the OPEN/CLOSE button to open or close
the disc tray.
■ Do not push the disc tray while it is being opened or closed, as
this may cause a product malfunction.
■ Do not place foreign materials on or in the disc tray.
■ Some functions may perform differently or be disabled depending
on the disc type. If this occurs, refer to the instructions written on
the disc case.
■ Be especially careful that children's fi ngers are not caught
between the disc tray and the tray chassis when it closes.
■ After turning power on, it will take a few seconds until the DVD
Recorder & VCR operates.
English - 36