Variable Search System - Samsung DVD-VR350 Instruction Manual

Go To [0:00:00]
◄ ◄
00:00:49
End Search
► ►
00:00:13
Scan and Play
► ►
00:01:49
Skip
In Play mode, press F.ADV/SKIP button to cue ahead exactly 30
seconds. Press F.ADV/SKIP button repeatedly up to 4 times to cue
ahead 2 minutes.
Slow motion
In Still mode, press ► ► button for slow motion. Press the ► ► button
repeatedly to play slow motion speed at 1/10, 1/7, 1/5 times. Press the
PLAY button twice to resume normal viewing.
▌

Variable Search System

Each time you record a cassette on this DVD Recorder & VCR,
an index is automatically marked on the tape when recording is
started.The Search function allows you to fast-forward or rewind to
a specifi c index and start playback from that point.
• This DVD Recorder & VCR uses a standard indexing system (VISS). As
a result, it will recognize any indexes marked by other VCRs using the
same system and vice versa.
Go To [0:00:00] Stop
Use this feature when you want to search for the 0:00:00 counter
position on a cassette.
1. Press the CANCEL button at the point on the tape where you want to
set the counter to 0:00:00.
2. While a cassette is stopped, press the ANYKEY button.
3. Press the ▲▼ buttons to select Go To [0:00:00], then press the OK
button. The VCR will rewind or fast forward, searching for the 0:00:00
counter position, and then automatically stop at that position.
End Search
Use this feature when you want to search for a blank position to
record a programme on a cassette.
1. While a cassette is stopped, press the ANYKEY button.
2. Press the ▲▼ buttons to select End Search, then press the OK
button. The VCR will fast forward, searching for a blank position, and
then automatically stop at that position. If the VCR reaches the end of
the tape during end search, the tape will be ejected.
Forward/Reverse Intro Scan
Use scan and play when you don't know exactly where a programme
is located on a cassette tape.
1. While a cassette is stopped, press the ANYKEY button.
2. Press the ▲▼ buttons to select Forward Intro Scan or Reverse Intro
Scan, then press the OK button. When an Index mark is found the
DVD Recorder & VCR will playback the tape for 5 seconds, after which
it will continue searching for the next Index mark.
English - 49