Advertisement
Driving your vehicle
The options for the initial Blind-Spot
Collision Warning includes the fol-
lowing:
- Normal:
When this option is selected, the
initial
Blind-Spot
Warning is activated normally. If
this setting feels too sensitive
change the option to 'later'.
The warning activation time may
feel late if the side/rear vehicle
abruptly accelerates.
- Later:
Select this warning activation
time when the traffic is light and
you are driving in at low speeds.
i
Information
If you change the warning timing, the
warning time of other systems may
change.
5-74
Collision
• Setting Warning Volume
The driver can select the warning
volume from the User Settings in
the LCD display by selecting 'User
settings → Driver assistance →
Warning volume → High/Medium/
Low'.
i
Information
If you change the warning volume, the
warning volume of other systems may
change.
For more information refer to
"LCD Display Modes" in chapter 3.
Operating Conditions
The system enters the ready status,
when 'Warning Only' is selected in
the cluster LCD display and vehicle
speed is above approximately 30
km/h (20 mph).
OAEPH059652L
Hide quick links:
Advertisement
Chapters
