Advertisement
Operating Conditions
- The ignition status is [ON].
- The rear view monitor button (1) is
pressed when gearshift status is
[D](Drive) or [N](Neutral).
Deactivations
- The rear view monitor button (1) is
pressed again
- One of the infotainment system
button (2) is pressed
• When the vehicle is reversing the
screen switches to the parking
guidance screen.
• If rear image was ON while driving,
an icon (
) is displayed in the
upper right of the infotainment sys-
tem screen to indicate Driving
Rear View Monitor function is sup-
ported.
WARNING
The Driving Rear View Monitor
is a driving assist function. As
the appearance on the screen
may differ from the actual loca-
tion, check the front/rear/side
view directly for safety.
Rear View Monitor – Top view
When you touch the icon of infotain-
ment system, the top view is dis-
played on the screen and shows the
distance from the vehicle in the back
of your vehicle. Touch the icon
again, to switch back to the previous
screen.
CAUTION
•
The Rear View Monitor is not a
safety device. It only serves to
assist the driver in identifying
objects directly behind the
middle of the vehicle. The
camera does not cover the
complete area behind the
vehicle.
•
Never rely solely on the rear
view monitor. As there are
blind spots that do not appear
on the camera while backing
up and parking, You must
always use methods of view-
ing the area behind you
including looking over both
shoulders as well as continu-
ously checking all three rear
view mirrors.
•
Always look around your vehi-
cle to make sure there are no
objects or obstacles before
moving the vehicle in any
direction to prevent a collision.
3
3-99
Hide quick links:
Advertisement
Chapters
