System Description - Hyundai Ioniq EV 2020 Owner's Manual

Driving your vehicle
BLIND-SPOT COLLISION WARNING (BCW) SYSTEM (IF EQUIPPED)

System description

Blind-Spot Collision Warning
(BCW)
The Blind-Spot Collision Warning
System (BCW) uses radar sensors in
the rear bumper to monitor and warn
the driver when it detects an
approaching vehicle in the driver's
blind spot area.
1) Blind-Spot Area
The blind spot detection range varies
relative to vehicle speed.
Note that if your vehicle is traveling
much faster than the vehicles around
you, the warning will not occur.
5-72
2) Closing at high speed
The Lane Change Assist feature will
alert you when it detects a vehicle is
approaching in an adjacent lane at a
high rate of speed. If the driver acti-
vates the turn signal when the sys-
tem detects an oncoming vehicle,
the system sounds an audible alert.
OAD058153L
• Always be aware of road con-
ditions while driving and be
alert for unexpected situa-
tions even though the Blind-
Spot Collision
System is operating.
• The Blind-Spot
Warning System (BCW) is
supplemental
assist you. Do not entirely rely
on the systems. Always pay
OAD058154L
attention, while driving, for
your safety.
• The Blind-Spot
Warning System (BCW) is not
substitutes for proper and
safe driving. Always drive
safely and use caution when
changing lanes or backing up
the vehicle.
The Blind-Spot
Warning System (BCW) may
not detect every object along-
side the vehicle.
WARNING
Warning
Collision
systems to
Collision
Collision